39511-1004 - Molex

39511-1004 Frequently Asked Questions (FAQs)

• What is the recommended torque for the screw terminals?
  The recommended torque for the screw terminals is 0.5-1.5 Nm (4.4-13.4 in-lbs). It's essential to follow this torque specification to ensure reliable connections and prevent damage to the connector.
• Can I use this connector in high-vibration applications?
  Yes, the 39511-1004 connector is designed to withstand vibrations and can be used in applications with moderate to high vibration levels. However, it's essential to follow proper mounting and installation procedures to ensure the connector remains secure.
• Is this connector suitable for outdoor or harsh environment applications?
  The 39511-1004 connector has a rating of IP20, which means it provides some protection against solid objects and fingers, but it's not designed for outdoor or harsh environment applications. If you need a connector for outdoor use, consider using a connector with a higher IP rating, such as IP67 or IP69K.
• Can I use this connector with wire sizes other than 20 AWG?
  While the datasheet specifies 20 AWG wire, the connector can accommodate wire sizes between 18 AWG and 22 AWG. However, using wire sizes outside this range may affect the connector's performance and reliability.
• How do I ensure proper mating and unmating of the connector?
  To ensure proper mating and unmating, make sure the connector is properly aligned and the mating surfaces are clean and free of debris. Apply gentle pressure while mating the connector, and use a gentle rocking motion while unmating to prevent damage to the contacts.