405C11A11M05920 footprint, schematic symbol and 3D model by CTS

Symbol

PCB Footprints

3D Models

405C11A11M05920 Details

CTS Corporation recommends a symmetrical PCB layout with a solid ground plane, and the crystal oscillator should be placed as close as possible to the microcontroller or clock input. Additionally, the PCB traces should be kept short and away from noise sources.
CTS Corporation recommends using ESD protection devices such as TVS diodes or ESD suppressors on the input and output pins of the crystal oscillator to prevent damage from electrostatic discharge.
The 405C11A11M05920 has an operating temperature range of -40°C to +85°C, but it's recommended to derate the frequency tolerance and stability over the full temperature range.
CTS Corporation recommends using a power-on reset circuit or a voltage supervisor to ensure the crystal oscillator starts up reliably and oscillates at the correct frequency.
The recommended drive level for the 405C11A11M05920 is 1-10 μW, and exceeding this level may cause the crystal to overheat or degrade over time.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the 405C11A11M05920 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like 405C1, or try a keyword search, such as Quartz Crystals

If you searched for 405C11A11M05920, you might also be interested in these parts:

Showing 0 results

Image	Part Number	Model
	405D11A11M05920 CTS Corporation Parallel - Fundamental Quartz Crystal, 11.0592MHz Nom
For a full list of alternate parts for 405C11A11M05920, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →