405I35D24M00000 footprint, schematic symbol and 3D model by CTS

Symbol

PCB Footprints

3D Models

405I35D24M00000 Details

A symmetrical layout with a solid ground plane and minimal signal trace length is recommended. Keep the oscillator away from noise sources and ensure a low-impedance path to ground.
Ensure a clean power supply, add a 0.1uF decoupling capacitor near the VCC pin, and use a pull-up resistor (1kΩ) on the EN pin if not using an enable function.
The frequency deviation is typically ±50 ppm over the operating temperature range (-40°C to 85°C), but this can vary depending on the specific application and environmental conditions.
Yes, the 405I35D24M00000 is designed to operate in harsh environments, including high-vibration applications. However, ensure proper PCB mounting and consider additional mechanical support if necessary.
Check the power supply voltage, ensure proper PCB layout, and verify the load capacitance. Use an oscilloscope to measure the output frequency and verify it against the datasheet specifications.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the 405I35D24M00000 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like 405I3, or try a keyword search, such as Quartz Crystals

If you searched for 405I35D24M00000, you might also be interested in these parts:

Showing 0 results

Image	Part Number	Model
	405C35D24M00000 CTS Corporation Parallel - Fundamental Quartz Crystal, 24MHz Nom
	405D35D24M00000 CTS Corporation Parallel - Fundamental Quartz Crystal, 24MHz Nom
For a full list of alternate parts for 405I35D24M00000, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →