CTS Corporation recommends a 4-layer PCB with a solid ground plane and a separate power plane for the oscillator circuit. Additionally, keep the oscillator circuit as close to the crystal as possible and use a guard ring around the oscillator circuit to minimize noise.
To ensure reliable startup, make sure the power supply is stable and within the recommended range. Also, ensure the crystal is properly mounted and the oscillator circuit is properly biased. A 10kΩ to 100kΩ pull-up resistor on the oscillator output can also help improve startup reliability.
The maximum frequency deviation allowed for the 407F35E009M6000 is ±50 ppm over the entire operating temperature range of -40°C to +85°C.
The 407F35E009M6000 is designed to operate in a variety of environments, including industrial and automotive applications. However, it's essential to ensure the device is properly packaged and protected from extreme temperatures, humidity, and vibration. Consult the datasheet for specific operating conditions and consider additional protection measures if necessary.
To troubleshoot oscillator startup issues, check the power supply voltage, ensure the crystal is properly mounted, and verify the oscillator circuit is properly biased. Also, check for any noise or interference on the oscillator output and ensure the load capacitance is within the recommended range.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
407F35E009M6000 Overview
Use the download button to access the 407F35E009M6000 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 407F3,
or try a keyword search, such as Quartz Crystals
