Description:The 502 Loco™ is the most cost effective way to generate a high-quality, high-frequency clock output and a reference from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 160 MHz. Stored in the chip's ROM is the ability to generate six different multiplicati
Renesas provides a recommended PCB layout guide for the 502MLF, which includes guidelines for thermal vias, copper pours, and component placement to ensure optimal thermal performance. It's available on the Renesas website or through their support team.
The 502MLF requires a high current supply, typically in the range of 10-20A. To handle this, engineers can use a high-current power supply, add decoupling capacitors, and ensure that the PCB traces and vias are designed to handle the high current. Additionally, using a power management IC (PMIC) can help regulate the voltage and current supply.
The input and output capacitors for the 502MLF should be selected based on the specific application requirements, such as voltage rating, capacitance value, and ESR. Renesas recommends using low-ESR capacitors with a voltage rating of at least 2x the input voltage. The datasheet provides general guidelines, but engineers should consult with Renesas support or a capacitor manufacturer for specific recommendations.
To ensure EMC with the 502MLF, engineers should follow good design practices, such as using a metal shield or enclosure, keeping sensitive components away from the 502MLF, and using EMI filters or chokes on the input and output lines. Additionally, Renesas provides EMC guidelines and application notes that can help engineers design an EMC-compliant system.
The 502MLF has a high power density, which requires effective thermal management. Engineers can use heat sinks, thermal interface materials (TIMs), and fans to dissipate heat. Renesas provides thermal management guidelines and recommends using a heat sink with a thermal resistance of less than 1°C/W. Engineers should also consider using a thermal simulation tool to optimize their design.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
502MLF Overview
Use the download button to access the 502MLF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 502ML,
or try a keyword search, such as Clock Generators
Suggested Parts
If you searched for 502MLF, you might also be interested in these parts:
