A good PCB layout for the 5701-RC involves keeping the input and output traces short and separate, using a solid ground plane, and placing the device close to the power source. Additionally, it's recommended to use a low-ESR capacitor for the output filter.
To ensure proper thermal management, make sure to provide adequate airflow around the device, use a heat sink if necessary, and avoid blocking the airflow vents on the package. The maximum junction temperature (Tj) should not exceed 125°C.
The recommended input capacitor value is 10uF to 22uF, with a voltage rating of at least 1.5 times the input voltage. A low-ESR ceramic or film capacitor is recommended, such as an X5R or X7R dielectric.
The 5701-RC is rated for operation up to 85°C ambient temperature. For high-temperature applications, consider using a heat sink or a thermally enhanced package. Always check the device's thermal derating curve to ensure reliable operation.
To troubleshoot issues with the 5701-RC, start by checking the input voltage, output load, and PCB layout. Verify that the device is properly soldered and that the thermal interface material is applied correctly. Use an oscilloscope to check for output voltage ripple and noise. Consult the datasheet and application notes for guidance on troubleshooting and debugging.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
5701-RC Overview
Use the download button to access the 5701-RC schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 5701-,
or try a keyword search, such as Fixed Inductors
