Part Image

5L1503L-000NVGI8 - Renesas Electronics

Description: The 5L1503 is a series of small form factor programmable clock generators intended for low-power, consumer, battery powered applications, wearable and smart devices.The device is a 1 PLL + DCO architecture design with an external fundamental crystal or clock input. The device allows up to 3 unique frequency outputs. The 5L1503 has built-in unique features such as Proactive Power Saving (PPS) and an extreme low power DCO to support system date/time keeping clock at 32.768kHz. Dynamic Frequency Control (DFC)

Download 5L1503L-000NVGI8 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
5L1503L-000NVGI8 - Renesas Electronics PCB footprint - Small Outline No-lead - Small Outline No-lead - NVG10
click to zoom
3D Models
5L1503L-000NVGI8 - Renesas Electronics  - 3D model - Small Outline No-lead - NVG10
click to zoom

5L1503L-000NVGI8 Details

  • Manufacturer Part Number:

    5L1503L-000NVGI8

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    VFQFPN

  • Pin Count:

    10

  • Manufacturer Package Code:

    NVG10

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • JESD-30 Code:

    S-PDSO-N10

  • JESD-609 Code:

    e3

  • Length:

    2 mm

  • Moisture Sensitivity Level:

    1

  • Number of Terminals:

    10

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Clock Frequency-Max:

    100 MHz

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC10,.08,16

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Primary Clock/Crystal Frequency-Nom:

    40 MHz

  • Seated Height-Max:

    0.6 mm

  • Supply Current-Max:

    2 mA

  • Supply Voltage-Max:

    1.89 V

  • Supply Voltage-Min:

    1.71 V

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.4 mm

  • Terminal Position:

    DUAL

  • Width:

    2 mm

  • uPs/uCs/Peripheral ICs Type:

    CLOCK GENERATOR, OTHER

5L1503L-000NVGI8 Frequently Asked Questions (FAQs)

  • Renesas provides a recommended PCB layout guide in their application note (AP6111) for the 5L1503L-000NVGI8. It suggests using a 4-layer PCB with a solid ground plane, placing the device near the center of the board, and using thermal vias to improve heat dissipation.
  • To ensure reliable operation in high-temperature environments, it's essential to follow the recommended operating conditions, use a suitable thermal interface material, and implement a robust cooling system. Additionally, consider using a thermal sensor to monitor the device temperature and implement thermal throttling or shutdown mechanisms if necessary.
  • Using a different input voltage than the recommended 3.3V may affect the device's performance, power consumption, and reliability. Consult the datasheet for the recommended input voltage range and ensure that the input voltage is within the specified limits. If a different input voltage is required, consult with Renesas support or a qualified engineer to determine the feasibility and potential implications.
  • To troubleshoot issues with the I2C interface, start by verifying the I2C bus voltage, clock frequency, and signal integrity. Use an oscilloscope to inspect the I2C signals and ensure they meet the specifications. Check the device's I2C address, clock stretching, and bus arbitration mechanisms. If issues persist, consult the datasheet, application notes, or contact Renesas support for further assistance.
  • The 5L1503L-000NVGI8 is designed to meet EMI and RFI standards, but it's still essential to follow proper PCB design and layout practices to minimize electromagnetic interference. Use shielding, filtering, and grounding techniques to reduce emissions and improve immunity. Consult the datasheet and application notes for specific guidance on EMI and RFI considerations.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

5L1503L-000NVGI8 Overview

Use the download button to access the 5L1503L-000NVGI8 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 5L150, or try a keyword search, such as Clock Generators

Parts related to 5L1503L-000NVGI8

Showing 0 results