The recommended PCB footprint for the 6TQ045S is a rectangular pad with a minimum size of 2.5 mm x 1.5 mm, with a 0.5 mm radius corner and a 0.3 mm spacing between pads.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and apply a solder flux with a moderate activity level. Avoid using excessive solder or flux, and ensure the component is properly aligned on the PCB.
The maximum allowable voltage derating for the 6TQ045S is 10% of the rated voltage, which is 45 V. Therefore, the maximum allowable voltage derating is 4.5 V.
The 6TQ045S is rated for operation up to 150°C. However, it's recommended to derate the voltage and current ratings according to the temperature derating curve provided in the datasheet to ensure reliable operation.
The 6TQ045S has an internal ESD protection diode, but it's still recommended to follow proper ESD handling procedures during assembly and storage, such as using an ESD wrist strap, mat, or storage container.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
6TQ045S Overview
Use the download button to access the 6TQ045S schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like 6TQ04,
or try a keyword search, such as Rectifier Diodes