Description:The 7132 is a high-speed 2K x 8 Dual-Port Static RAM designed to be used as a stand-alone 8-bit Dual-Port RAM or as a "MASTER" Dual-Port RAM together with the 7142 "SLAVE" Dual-Port in 16-bit-or-more word width systems which would result in full-speed, error free operation without the need for additional discrete logic. An automatic power down feature, controlled by CE, permits the on chip circuitry of each port to enter a very low standby power mode. Military grade product in compliance with MIL-PRF-38535
Renesas provides a recommended PCB layout guide in their application note (AN1844) for the 7132SA series, which includes the 7132SA35CB. The guide provides detailed information on thermal vias, copper pours, and component placement for optimal thermal performance.
To ensure reliable operation in high-temperature environments, it's essential to follow Renesas' guidelines for thermal design and layout. Additionally, consider using thermal interface materials (TIMs) and heat sinks to reduce the junction temperature. Renesas also recommends using a thermal monitoring circuit to detect overheating and take corrective action.
Renesas recommends using low-ESR capacitors with a minimum capacitance of 10uF for the input and output capacitors. The capacitors should be rated for the maximum operating voltage and have a temperature rating of at least 105°C. Renesas also suggests using X5R or X7R dielectric capacitors for optimal performance.
Renesas provides a built-in OCP and SCP feature in the 7132SA35CB. To implement these features, connect the OCP pin to a resistor divider network that sets the overcurrent threshold. For SCP, connect the SCP pin to a resistor divider network that sets the short-circuit detection threshold. Renesas recommends using a dedicated IC or a microcontroller to monitor and control the OCP and SCP features.
Renesas recommends setting the soft-start time to 1-2ms to prevent inrush currents during startup. For the tracking feature, set the tracking voltage to 0.5-1.5V below the output voltage to ensure proper regulation. The tracking voltage should be set based on the specific application requirements and the output voltage tolerance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
7132SA35CB Overview
Use the download button to access the 7132SA35CB schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like 7132S,
or try a keyword search, such as SRAMs
