Description:The 71342 is a high-speed 4K x 8 Dual-Port Static RAM containing a fully independent semaphore logic block to assist in arbitrating between ports. This block contains unassigned flags which can be accessed by either side, however, only one side can control the flag at any time. An automatic power down feature, controlled by CE and SEM, permits the on-chip circuitry of each port to enter a very low standby power mode (both CE and SEM HIGH).
Renesas provides a recommended PCB layout guide in their application note (APL-AN-114) for thermal management. It suggests using a 4-layer PCB with a solid ground plane, placing thermal vias under the package, and using a heat sink with a thermal interface material.
Renesas recommends following the thermal design guidelines, using a heat sink, and ensuring good airflow around the device. Additionally, consider using a thermal protection circuit or a temperature sensor to monitor the device temperature and take corrective action if necessary.
Renesas recommends using a low-ESR ceramic capacitor (e.g., X5R or X7R) for CIN, with a value between 4.7 μF to 10 μF. For COUT, use a low-ESR capacitor with a value between 10 μF to 22 μF. The capacitor selection should be based on the specific application requirements and operating conditions.
Check the power supply voltage, ensure it meets the recommended voltage range, and verify the POR timing. Also, review the PCB layout to ensure there are no noise or signal integrity issues affecting the POR circuit. If issues persist, consult Renesas' application notes or contact their support team for further assistance.
Renesas recommends following good EMC design practices, such as using a shielded enclosure, minimizing loop areas, and using filtering components (e.g., ferrite beads, common-mode chokes) to reduce EMI. Additionally, ensure the PCB layout is designed to minimize radiation and susceptibility to external interference.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
71342LA25JGI Overview
Use the download button to access the 71342LA25JGI schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 71342,
or try a keyword search, such as SRAMs
