The maximum clock frequency is 30 MHz, but it's recommended to operate at 20 MHz or lower for reliable operation.
To ensure that the output pins are in a high-impedance state during power-up, connect the OE (Output Enable) pin to VCC through a pull-up resistor. This will keep the outputs in a high-impedance state until the device is fully powered up and the OE pin is actively driven low.
The recommended power-on sequence is to apply VCC first, followed by the clock signal, and then the data input. This ensures that the device is properly initialized and minimizes the risk of latch-up or other unexpected behavior.
Yes, the 74HCT595S16-13 can be used as a level shifter, but it's not recommended. The device is designed as a shift register, and using it as a level shifter may compromise its performance and reliability. If level shifting is required, it's recommended to use a dedicated level shifter IC.
The 74HCT595S16-13 has a maximum junction temperature of 150°C. To ensure reliable operation, it's recommended to keep the device within a safe operating temperature range by providing adequate heat sinking, using a thermally conductive PCB material, and minimizing power consumption.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
74HCT595S16-13 Overview
Use the download button to access the 74HCT595S16-13 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 74HCT,
or try a keyword search, such as Shift Registers
