A symmetrical layout with a central ground plane and minimal signal trace length is recommended. Keep the input and output traces separate and avoid crossing them to minimize noise and crosstalk.
Use a 10uF to 22uF ceramic capacitor in parallel with a 100nF to 1uF ceramic capacitor, both connected between the VIN pin and GND pin, as close to the IC as possible.
The maximum allowed voltage on the EN pin is 6V, exceeding which may cause damage to the IC.
The 8106-RC is rated for operation up to 125°C, but thermal derating applies above 85°C. Ensure proper heat sinking and thermal management to prevent overheating.
Check for proper power supply, decoupling, and PCB layout. Verify the input voltage, output voltage, and enable pin voltage. Use an oscilloscope to inspect the output waveform and check for noise or oscillations.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
8106-RC Overview
Use the download button to access the 8106-RC schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 8106-,
or try a keyword search, such as Data Line Filters
