Description:The 8T49N240 has one fractional-feedback PLL that can be used as a frequency translator with jitter attenuation or a frequency synthesizer. It is equipped with three integer and one fractional output dividers, allowing the generation of up to two different output frequencies, ranging from 8kHz to 1GHz. Output frequencies can be completely independent of the input frequencies, two of these frequencies can be completely independent of each other and the other two will be integer-related to one of the other t
A good PCB layout for the 8T49N240-994NLGI involves keeping the clock input traces as short as possible, using a solid ground plane, and minimizing the distance between the device and the crystal oscillator. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure proper power and decoupling, use a high-quality power supply with low noise and ripple. Add decoupling capacitors (e.g., 0.1uF and 10uF) close to the device's power pins, and consider adding a 10-ohm resistor in series with the power supply to reduce noise. Also, ensure the power plane is well-decoupled from the ground plane.
The 8T49N240-994NLGI has a maximum junction temperature of 150°C. Ensure good airflow around the device, and consider using a heat sink or thermal pad if the device will be operating in a high-temperature environment. Also, avoid overheating the device during soldering or rework.
To troubleshoot clock output issues, first verify the input clock signal is stable and within the recommended frequency range. Check the device's power supply and decoupling, and ensure the output clock signal is properly terminated. Use an oscilloscope to verify the clock signal's amplitude, frequency, and jitter.
To minimize EMI and RFI, use a shielded enclosure, and ensure the PCB layout is designed to reduce radiation. Use a common-mode choke or ferrite bead on the clock input and output lines, and consider adding EMI filters or shielding to the device's pins. Also, ensure the device is properly grounded and decoupled.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
8T49N240-994NLGI Overview
Use the download button to access the 8T49N240-994NLGI schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 8T49N,
or try a keyword search, such as Clock Generators
