Part Image

93AA76AT-I/OT - Microchip

Description: 8k, 1024 X 8 SERIAL EEPROM,1.8V,IND

Download 93AA76AT-I/OT Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
93AA76AT-I/OT - Microchip PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - 6-LEAD PLASTIC(OT)[SOT-23]
click to zoom
3D Models
93AA76AT-I/OT - Microchip  - 3D model - SOT23 (6-Pin) - 6-LEAD PLASTIC(OT)[SOT-23]
click to zoom

93AA76AT-I/OT Details

  • Manufacturer Part Number:

    93AA76AT-I/OT

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOT-23

  • Pin Count:

    6

  • Manufacturer Package Code:

    SOT-23-6

  • Country Of Origin:

    Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Factory Lead Time:

    6 Weeks

  • Manufacturer:

    Microchip Technology Inc

  • YTEOL:

    9

  • Clock Frequency-Max (fCLK):

    3 MHz

  • Data Retention Time-Min:

    200

  • Endurance:

    1000000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e3

  • Length:

    2.95 mm

  • Memory Density:

    8192 bit

  • Memory IC Type:

    EEPROM

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Ports:

    1

  • Number of Terminals:

    6

  • Number of Words:

    1024 words

  • Number of Words Code:

    1000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    1KX8

  • Output Characteristics:

    TOTEM POLE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Ready/Busy:

    YES

  • Reverse Pinout:

    NO

  • Screening Level:

    TS 16949

  • Seated Height-Max:

    1.45 mm

  • Serial Bus Type:

    MICROWIRE

  • Standby Current-Max:

    0.000001 A

  • Supply Current-Max:

    0.003 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    1.8 V

  • Supply Voltage-Nom (Vsup):

    2.5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    40

  • Toggle Bit:

    YES

  • Width:

    1.63 mm

  • Write Cycle Time-Max (tWC):

    5 ms

  • Write Protection:

    SOFTWARE

93AA76AT-I/OT Frequently Asked Questions (FAQs)

  • The maximum clock frequency for the 93AA76AT-I/OT is 1 MHz, as specified in the datasheet. However, it's recommended to operate at a lower frequency (e.g., 400 kHz) to ensure reliable operation and minimize power consumption.
  • During power-up, the HOLD pin should be pulled high (VCC) to ensure the device is in a known state. During power-down, the HOLD pin should be pulled low (GND) to prevent unwanted writes to the device. It's essential to follow the recommended power-up and power-down sequences to avoid data corruption or device damage.
  • The recommended voltage range for the 93AA76AT-I/OT is 2.5V to 5.5V. Operating the device outside this range may affect its performance, reliability, or even cause damage. It's crucial to ensure the voltage supply is within the specified range to guarantee proper operation.
  • To implement a reliable write cycle, ensure the CS pin is low, the WP pin is high, and the device is not in a HOLD or RESET state. Then, send the write command and data according to the datasheet's timing diagrams. Verify the write cycle by reading back the data to ensure it was written correctly.
  • The WP (Write Protect) pin is used to prevent accidental writes to the device. When the WP pin is low, the device is in a write-protected state, and any write attempts will be ignored. To enable writes, the WP pin should be pulled high. It's recommended to use the WP pin to protect the device during power-up and power-down sequences or when the device is not in use.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

93AA76AT-I/OT Overview

Use the download button to access the 93AA76AT-I/OT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 93AA7, or try a keyword search, such as EEPROMs

About Microchip

Microchip Technology Inc. is a leading manufacturer of microcontrollers and semiconductor devices for a wide range of applications in the aerospace, automotive, consumer electronics, industrial, and medical industries. Alongside a comprehensive product portfolio, Microchip Technology Inc. also provides easy-to-use development tools that enable engineers to create optimal designs quickly with minimal iterations to reduce risk while lowering total system costs to market. Headquartered in Chandler, Arizona, th

Parts related to 93AA76AT-I/OT

Showing 0 results

93AA76AT-I/OT Alternates

Showing results

Image Part Number Model
Part Image 93AA76CT-E/OT Microchip Technology Inc

EEPROM, 1KX8, Serial, CMOS, PDSO6

Part Image 93AA76BT-I/OTG Microchip Technology Inc

EEPROM, 512X16, Serial, CMOS, PDSO6

Part Image 93AA76A-TI/OTG Microchip Technology Inc

1K X 8 MICROWIRE BUS SERIAL EEPROM, PDSO6, LEAD FREE, PLASTIC, SC-74A, SOT-23, 6 PIN

Part Image 93AA76AT-I/OTG Microchip Technology Inc

EEPROM, 1KX8, Serial, CMOS, PDSO6

Part Image 93AA76A-E/OT Microchip Technology Inc

EEPROM, 1KX8, Serial, CMOS, PDSO6

For a full list of alternate parts for 93AA76AT-I/OT, check out Findchips.com