Allegro recommends a 4-layer PCB with a solid ground plane, and to keep the sense lines as short as possible. Additionally, it's recommended to use a separate power plane for the VCC and GND pins to minimize noise and ensure accurate measurements.
To minimize the effects of noise, Allegro recommends using a low-pass filter or a shielded cable to connect the output signal to the microcontroller or other downstream components. Additionally, consider using a differential output configuration to reduce common-mode noise.
The A1104ELHLT-T is rated for operation from -40°C to 150°C, but it's recommended to operate within the -20°C to 85°C range for optimal performance and reliability.
Yes, the A1104ELHLT-T is designed to withstand high-vibration environments. However, it's recommended to follow proper PCB mounting and soldering techniques to ensure the device remains securely attached to the board.
Allegro recommends a two-point calibration process: zero-point calibration (with no magnetic field present) and full-scale calibration (with a known magnetic field present). The calibration process should be performed at the operating temperature range of the device.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
A1104ELHLT-T Overview
Use the download button to access the A1104ELHLT-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like A1104,
or try a keyword search, such as Magnetic Field Sensors
