A good PCB layout for the A1104EUA-T involves keeping the sense lines (VCC, GND, and SENSE) as short as possible, using a ground plane, and minimizing the distance between the device and the sense resistor. A 4-layer PCB with a dedicated ground plane is recommended.
To ensure accurate current sensing, use a sense resistor with a low temperature coefficient, keep the sense lines short and away from noise sources, and use a low-pass filter to reduce noise. Also, calibrate the device by measuring the output voltage at zero current and adjusting the offset voltage accordingly.
The maximum allowable voltage on the VCC pin of the A1104EUA-T is 24V, but it's recommended to operate the device at a voltage between 4.5V and 18V for optimal performance and reliability.
The A1104EUA-T is rated for operation up to 150°C, but its accuracy and reliability may degrade at high temperatures. It's recommended to derate the device's performance and consider using a heat sink or thermal management system in high-temperature applications.
To protect the A1104EUA-T from EMI, use a shielded cable for the sense lines, keep the device away from noise sources, and use a common-mode filter or ferrite bead on the sense lines. Also, ensure good PCB layout practices, such as using a ground plane and minimizing loop areas.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
A1104EUA-T Overview
Use the download button to access the A1104EUA-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like A1104,
or try a keyword search, such as Magnetic Field Sensors
Suggested Parts
If you searched for A1104EUA-T, you might also be interested in these parts:
