Allegro provides a recommended PCB layout in their application note AN296068, which includes guidelines for trace routing, component placement, and thermal management to ensure optimal performance and minimize noise.
Calibration involves adjusting the zero-current offset and sensitivity of the device. Allegro provides a calibration procedure in their datasheet, which involves applying a known current and adjusting the output voltage accordingly. Additionally, some users have reported success with using a calibration resistor to simplify the process.
While the datasheet specifies a recommended VCC range of 3.3V to 5V, Allegro's application note AN296068 recommends limiting the VCC voltage to 4.5V or less to ensure reliable operation and prevent damage to the device.
The A1192LUA-T is designed for low-frequency current measurement (up to 100 kHz). For high-frequency applications, Allegro recommends using their high-bandwidth current sensors, such as the ACS724 or ACS725 series, which are designed for frequencies up to 1 MHz.
The A1192LUA-T has an output voltage offset that can be trimmed using the VREF pin. Allegro provides a procedure for trimming the offset in their datasheet. Additionally, some users have reported success with using an external op-amp to amplify and offset the output voltage to match their specific application requirements.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
A1192LUA-T Overview
Use the download button to access the A1192LUA-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like A1192,
or try a keyword search, such as Magnetic Field Sensors
