A symmetrical layout with a central ground plane and minimal signal trace length is recommended. Allegro provides a reference layout in their application note AN296055.
The output voltage swing of the A1203LLHLT-T is proportional to the input current. To ensure accurate current sensing, use a voltage reference and an ADC with a high common-mode rejection ratio to reject noise and interference.
The A1203LLHLT-T is rated for operation from -40°C to 150°C (TJ). However, the device may still function outside this range, but with reduced accuracy and reliability.
Calibration involves trimming the device's internal offset and gain. Allegro provides a calibration procedure in their application note AN296055, which involves applying a known current and adjusting the device's internal registers.
High PCB thermal resistance can reduce the accuracy of the A1203LLHLT-T. Ensure good thermal conductivity by using a thermally enhanced PCB design and a heat sink if necessary.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
A1203LLHLT-T Overview
Use the download button to access the A1203LLHLT-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like A1203,
or try a keyword search, such as Other Signal Circuits
