Allegro recommends a 4-layer board with a solid ground plane, and a separate layer for the power supply. The device should be placed close to the motor, and the sense lines should be routed away from the motor windings and other noise sources.
The A1205LLHLX-T has an internal current sense amplifier that outputs a voltage proportional to the motor current. This voltage can be filtered and amplified externally to provide a accurate current measurement.
The device should be mounted on a PCB with a thermal pad connected to a solid ground plane. A thermal interface material (TIM) can be used to improve heat transfer between the device and the PCB.
The A1205LLHLX-T can be configured for different motor types (e.g. 3-phase, 2-phase, or 1-phase) by adjusting the sense resistor values and the output stage configuration. Refer to the application note AN295043 for more information.
The A1205LLHLX-T has built-in fault detection and protection circuitry, including overcurrent, overtemperature, and undervoltage detection. The device can be configured to respond to faults by shutting down the output stage or generating an error signal.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
A1205LLHLX-T Overview
Use the download button to access the A1205LLHLX-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like A1205,
or try a keyword search, such as Other Signal Circuits
