Allegro provides a recommended PCB layout guide in their application note AN296070, which includes guidelines for trace routing, component placement, and thermal management to ensure optimal performance and minimize noise.
The A1266ELHLX-T has a thermal pad on the bottom of the package, which should be connected to a thermal ground plane on the PCB to dissipate heat. Additionally, Allegro recommends using thermal vias and a heat sink if necessary, depending on the application's thermal requirements.
Allegro recommends using a 10 μF to 22 μF ceramic capacitor with a voltage rating of 10 V or higher for the VCC filter capacitor. The capacitor should be placed as close as possible to the VCC pin to minimize noise and ensure stable operation.
The A1266ELHLX-T has a low-power mode that can be enabled by pulling the EN pin low. In low-power mode, the device consumes significantly less power, but the output voltage is not regulated. Allegro recommends using a pull-down resistor on the EN pin to ensure a clean transition to low-power mode.
The maximum allowable voltage on the output pins of the A1266ELHLX-T is 18 V, which is the absolute maximum rating. However, Allegro recommends operating the device within the recommended operating conditions to ensure reliable operation and prevent damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
A1266ELHLX-T Overview
Use the download button to access the A1266ELHLX-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like A1266,
or try a keyword search, such as Other Signal Circuits
