Part Image

A25L080-F - AMIC Technology

Description: Serial FLASH 8MB, 2.7V, SPI, DIP8 A25L080-F, Serial Flash Memory 8Mbit, 8ns, 2.7 → 3.6 V, 8-Pin, PDIP

Download A25L080-F Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
A25L080-F - AMIC Technology PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - P-DIP 8L
click to zoom
3D Models
A25L080-F - AMIC Technology  - 3D model - Dual-In-Line Packages - P-DIP 8L
click to zoom

A25L080-F Details

  • Manufacturer Part Number:

    A25L080-F

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Package Description:

    DIP-8

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Manufacturer:

    AMIC Technology

  • YTEOL:

    0

  • Clock Frequency-Max (fCLK):

    100 MHz

  • Data Retention Time-Min:

    20

  • Endurance:

    100000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDIP-T8

  • Length:

    9.14 mm

  • Memory Density:

    8388608 bit

  • Memory IC Type:

    FLASH

  • Memory Width:

    8

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    1048576 words

  • Number of Words Code:

    1000000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    70 °C

  • Organization:

    1MX8

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP8,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Parallel/Serial:

    SERIAL

  • Programming Voltage:

    3 V

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    4.57 mm

  • Serial Bus Type:

    SPI

  • Standby Current-Max:

    0.000025 A

  • Supply Current-Max:

    0.025 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    2.7 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    NO

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Type:

    NOR TYPE

  • Width:

    7.62 mm

  • Write Protection:

    HARDWARE/SOFTWARE

A25L080-F Frequently Asked Questions (FAQs)

  • The recommended operating voltage range for A25L080-F is 2.7V to 3.6V, although it can operate from 2.3V to 3.6V with some performance degradation.
  • The HOLD# pin should be pulled high during power-up and power-down to prevent unwanted writes to the device. It's recommended to connect a pull-up resistor to VCC and a capacitor to GND to ensure a clean signal.
  • The maximum clock frequency for A25L080-F is 50 MHz, but it can operate up to 75 MHz with some performance degradation.
  • To ensure data integrity during power-down, the device should be write-protected by setting the WP# pin high or using the software write protection mechanism. Additionally, the device should be in a standby or power-down mode before the power supply is removed.
  • The typical programming time for A25L080-F is around 10-15 seconds for a full 8MB erase and program cycle, but this can vary depending on the programming algorithm and system configuration.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

A25L080-F Overview

Use the download button to access the A25L080-F schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like A25L0, or try a keyword search, such as Flash Memories

Parts related to A25L080-F

Showing 0 results