TXC recommends a symmetrical PCB layout with a ground plane underneath the oscillator to minimize noise and radiation. A 4-layer PCB with a dedicated ground layer is ideal. Keep the oscillator away from high-frequency components and ensure a clear return path for the ground connection.
To ensure reliable startup, TXC recommends a power-up ramp time of at least 1 ms/V. A slower power-up ramp can help prevent the oscillator from malfunctioning or not starting up at all. Additionally, ensure the power supply is stable and within the recommended operating range.
The AB-10.000MALE-T has a frequency tolerance of ±20 ppm over the operating temperature range. This means the oscillator's frequency can deviate by up to ±200 Hz from the nominal 10 MHz frequency. This deviation is due to factors like temperature, aging, and manufacturing tolerances.
The AB-10.000MALE-T is designed to operate in environments with moderate vibration. However, excessive vibration can affect the oscillator's performance and reliability. If your application involves high vibration, consider using a more ruggedized oscillator or taking additional measures to secure the component and PCB.
The AB-10.000MALE-T has built-in ESD protection, but it's still important to follow proper handling and assembly procedures to prevent damage. Use an ESD wrist strap or mat when handling the component, and ensure the PCB is designed with ESD protection in mind, such as using TVS diodes or ESD-protection circuits.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AB-10.000MALE-T Overview
Use the download button to access the AB-10.000MALE-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AB-10,
or try a keyword search, such as Quartz Crystals
