Part Image

AB11AH - NKK Switches

Description: SWITCH PUSH SPST-NO 0.4VA 28V

Download AB11AH Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
AB11AH - NKK Switches  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

AB11AH Details

  • Manufacturer Part Number:

    AB11AH

  • Brand Name:

    NKK Switches

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • HTS Code:

    8536.50.70.00

  • Manufacturer:

    NKK Switches

  • Actuator Length:

    0.213 inch

  • Actuator Material:

    POLYACETAL

  • Actuator Travel:

    1.0922 mm

  • Actuator Type:

    PUSHBUTTON

  • Body Breadth:

    6.1722 mm

  • Body Height:

    9.3726 mm

  • Body Length or Diameter:

    9.8044 mm

  • Bushing Length:

    0.177 inch

  • Center Contact Material:

    PHOSPHOR BRONZE

  • Center Contact Plating:

    GOLD

  • Contact (DC) Max Power Rating R Load:

    0.4VA@28VDC

  • Contact Function:

    OFF-(ON)

  • Contact Resistance:

    0.05 mΩ

  • Contact Timing:

    BREAK-BEFORE-MAKE

  • Dielectric Withstand Volts:

    500VAC V

  • Electrical Life:

    50000 Cycle(s)

  • End Contact Material:

    BRASS

  • End Contact Plating:

    GOLD

  • Housing Material:

    GLASS FILLED POLYAMIDE

  • Insulation Resistance:

    500000000 Ω

  • JESD-609 Code:

    e4

  • Mounting Feature:

    THROUGH HOLE-RIGHT ANGLE

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -30 °C

  • Sealing:

    EPOXY

  • Solderability:

    WAVE

  • Surface Mount:

    NO

  • Switch Function:

    SPST

  • Terminal Finish:

    GOLD

  • Terminal Length:

    0.122 inch

  • Terminal Material:

    BRASS

  • Termination Type:

    SOLDER

AB11AH Frequently Asked Questions (FAQs)

  • The recommended operating temperature range for the AB11AH is -20°C to 85°C, although it can withstand storage temperatures from -40°C to 100°C.
  • The AB11AH is rated for a minimum of 10,000 cycles, but this can vary depending on the specific application and environmental conditions.
  • Yes, the AB11AH is designed to withstand vibrations up to 10G (10 Hz to 2 kHz) and can operate reliably in high-vibration environments.
  • The AB11AH has a rating of IP40, which means it is protected against solid objects larger than 1 mm, but not against water or moisture. It is not recommended for use in wet or humid environments without additional protection.
  • The recommended torque for the AB11AH switch is 0.5 N·m to 1.5 N·m, although this can vary depending on the specific application and mounting method.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

AB11AH Overview

Use the download button to access the AB11AH 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like AB11A, or try a keyword search, such as Special Switches

Parts related to AB11AH

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview