ABL-8.192MHZ-B2 footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ABL-8.192MHZ-B2 Details

Abracon recommends a layout with a ground plane underneath the oscillator, and to keep the traces as short as possible to minimize noise and radiation. A 4-layer PCB with a dedicated ground layer is recommended.
The ABL-8.192MHZ-B2 is rated for operation up to 85°C, but it's not recommended to use it above 70°C for optimal performance and reliability. For high-temperature applications, consider using a different oscillator or consulting with Abracon's application engineers.
Use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder to the pads. Avoid applying excessive force or heat, which can damage the oscillator. Follow the recommended soldering profile and handling procedures to ensure reliable operation.
Yes, the ABL-8.192MHZ-B2 is designed to operate at a low power consumption of 1.5mA. However, it's essential to ensure that the power supply is stable and noise-free to maintain the oscillator's performance and accuracy.
Start by verifying the power supply and clock signal integrity. Check for proper soldering, PCB layout, and component placement. Use an oscilloscope to measure the clock signal and verify its frequency and amplitude. Consult Abracon's application notes and technical support for further assistance.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ABL-8.192MHZ-B2 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ABL-8, or try a keyword search, such as Quartz Crystals

Showing 0 results

Image	Part Number	Model
	ABL-08.1920MHZ-B2 Abracon Corporation Parallel - Fundamental Quartz Crystal,
For a full list of alternate parts for ABL-8.192MHZ-B2, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →