Abracon recommends a layout with a solid ground plane, minimal signal trace length, and a 10nF to 22nF decoupling capacitor between VCC and GND to ensure optimal performance and minimize noise.
The ABL-9.8304MHZ-B2 is rated for operation up to 85°C, but its frequency stability may degrade at higher temperatures. Abracon recommends derating the frequency tolerance by 5ppm/°C above 70°C.
Yes, the ABL-9.8304MHZ-B2 is designed to meet EMI requirements. Abracon recommends using a shielded enclosure, minimizing signal trace length, and adding EMI filters to ensure compliance with EMI standards.
Abracon recommends a drive level of 1-10μA to ensure optimal performance and minimize power consumption. Higher drive levels may cause excessive power consumption and reduced oscillator lifespan.
The ABL-9.8304MHZ-B2 oscillator may exhibit a brief start-up time (typically <10ms) and may require a power-on reset (POR) circuit to ensure proper operation. Abracon recommends consulting the application notes for specific guidance on power-up and power-down cycles.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ABL-9.8304MHZ-B2 Overview
Use the download button to access the ABL-9.8304MHZ-B2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ABL-9,
or try a keyword search, such as Quartz Crystals
