Abracon recommends a layout with a solid ground plane, minimal signal trace length, and a decoupling capacitor (e.g., 10nF) between VCC and GND to reduce noise and ensure stable operation.
The ABM10-48.000MHZ-D30-T3 is rated for operation up to 85°C, but its frequency stability may degrade above 70°C. For high-temperature applications, consider using a more temperature-stable oscillator or consulting with Abracon's application engineers.
The ABM10-48.000MHZ-D30-T3 is specified for 3.3V operation, but it can tolerate a supply voltage range of 2.7V to 3.6V. However, the oscillator's frequency and stability may be affected at voltages outside the recommended range. Consult with Abracon's application engineers for specific guidance.
The start-up time for the ABM10-48.000MHZ-D30-T3 is typically around 2-5ms, but this can vary depending on the specific application and PCB layout. To ensure reliable start-up, Abracon recommends using a power-on reset circuit or a start-up timer.
The ABM10-48.000MHZ-D30-T3 is a commercial-grade oscillator and may not meet the requirements for safety-critical applications. For such applications, consider using oscillators with higher reliability and fault tolerance, such as those with built-in self-test (BIST) or fail-safe features.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ABM10-48.000MHZ-D30-T3 Overview
Use the download button to access the ABM10-48.000MHZ-D30-T3 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ABM10,
or try a keyword search, such as Quartz Crystals
