ABM12-115-26.000MHZ-T3 footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ABM12-115-26.000MHZ-T3 Details

Abracon recommends a layout with a solid ground plane, minimal signal trace length, and a 10nF to 22nF decoupling capacitor between VCC and GND, placed as close to the oscillator as possible.
The ABM12-115-26.000MHZ-T3 is rated for operation up to 85°C, but its frequency stability may degrade above 70°C. For high-reliability applications, consider using a more temperature-stable oscillator or implementing temperature compensation.
Yes, the ABM12-115-26.000MHZ-T3 has a typical current consumption of 10mA, making it suitable for low-power designs. However, consider using a low-power oscillator or implementing power-saving modes to minimize overall system power consumption.
Ensure the power supply is stable and within the recommended voltage range (1.8V to 3.3V). Also, add a 1kΩ to 10kΩ pull-up resistor between the output pin and VCC to help the oscillator start up reliably.
Lead times and availability may vary depending on the region and distributor. Check with authorized distributors or Abracon's website for the latest information on lead times and inventory levels.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ABM12-115-26.000MHZ-T3 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ABM12, or try a keyword search, such as Quartz Crystals

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →