ABM12-32.000MHZ-B2X-T3 footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ABM12-32.000MHZ-B2X-T3 Details

The recommended soldering temperature profile is 260°C for 10 seconds, with a peak temperature of 240°C for 5 seconds. It's essential to follow the recommended profile to prevent damage to the device.
To ensure reliable startup, ensure the power supply voltage is stable and within the recommended range (1.8V to 3.3V). Also, add a 10nF to 22nF capacitor between the VCC and GND pins to filter out noise and ensure a clean power supply.
The maximum frequency deviation over the operating temperature range (-20°C to 70°C) is ±100 ppm. This means the oscillator frequency can vary by up to ±32 Hz over the entire temperature range.
The ABM12-32.000MHZ-B2X-T3 is designed for a drive level of 10pF. If your design requires a higher drive level, you may need to use an external buffer or amplifier to ensure reliable operation. Consult with Abracon Corporation or a qualified engineer for guidance.
To prevent electrostatic discharge (ESD) damage, handle the device by the body or use an ESD wrist strap. Ensure your workspace and tools are ESD-safe, and avoid touching the device's pins or internal components.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ABM12-32.000MHZ-B2X-T3 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ABM12, or try a keyword search, such as Quartz Crystals

If you searched for ABM12-32.000MHZ-B2X-T3, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →