Abracon recommends following a 4-layer PCB stack-up with a solid ground plane on the bottom layer, and using a microstrip or stripline layout for the RF signal traces. Additionally, keeping the RF signal traces as short as possible and using 50-ohm impedance matching is recommended.
Abracon recommends following the recommended soldering profile, using a solder with a melting point below 260°C, and ensuring the component is properly aligned on the PCB. Additionally, using a solder paste with a high melting point and a low-temperature reflow profile can help prevent damage.
The ACAR3705-S698 is rated for operation from -40°C to +85°C, but Abracon recommends derating the component's performance at temperatures above 70°C to ensure reliable operation.
Abracon recommends following standard ESD handling procedures, including using an ESD wrist strap or mat, and storing the components in an ESD-protective package. Additionally, ensuring the PCB is properly grounded and using ESD-protected tools can help prevent damage.
Abracon recommends storing the components in a dry, cool place, away from direct sunlight and moisture. The components should be stored in their original packaging or in a similar ESD-protective package, and should not be exposed to mechanical stress or vibration.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ACAR3705-S698 Overview
Use the download button to access the ACAR3705-S698 schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like ACAR3,
or try a keyword search, such as RF/Microwave Antennas
