The recommended PCB layout and land pattern can be found in the First Sensor application note AN500-9, which provides detailed guidelines for optimal performance and thermal management.
Calibration procedures can be found in the First Sensor application note AN500-9. It is recommended to perform a two-point calibration using a calibrated reference pressure source to ensure accurate measurements.
The AD500-9-TO52-S1 can withstand pressure spikes up to 2x the maximum rated pressure for a duration of 1 second. However, it is recommended to consult with First Sensor's technical support for specific guidance on overpressure protection.
The AD500-9-TO52-S1 is not inherently explosion-proof or intrinsically safe. If you need to use the sensor in a hazardous location, you must ensure that the system is designed and certified according to the relevant standards and regulations, such as ATEX or IECEx.
The response time of the AD500-9-TO52-S1 is typically <10 ms. This means that the sensor can accurately track pressure changes at frequencies up to 100 Hz. However, the actual response time may vary depending on the specific application and installation.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AD500-9-TO52-S1 Overview
Use the download button to access the AD500-9-TO52-S1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD500,
or try a keyword search, such as Photo Diodes
