Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AD5361BCPZ - Analog Devices

Description: AD5361BCPZ, 14 bit-Bit DAC 16-channel SPI, Microwire, 56-Pin LFCSP EP

Download AD5361BCPZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AD5361BCPZ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
AD5361BCPZ - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 56-Lead Lead Frame Chip Scale Package [LFCSP _VQ]
click to zoom
3D Models
AD5361BCPZ - Analog Devices - 3D model - Quad Flat No-Lead - 56-Lead Lead Frame Chip Scale Package [LFCSP _VQ]
click to zoom

AD5361BCPZ Details

  • Manufacturer Part Number:

    AD5361BCPZ

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFN

  • Package Description:

    ROHS COMPLIANT, MO-220VLLD-2, LFCSP-56

  • Pin Count:

    56

  • Manufacturer Package Code:

    CP-56-1

  • Country Of Origin:

    Singapore

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Analog Output Voltage-Max:

    15.1 V

  • Analog Output Voltage-Min:

    -15.1 V

  • Converter Type:

    D/A CONVERTER

  • Input Bit Code:

    2'S COMPLEMENT BINARY

  • Input Format:

    SERIAL

  • JESD-30 Code:

    S-XQCC-N56

  • JESD-609 Code:

    e3

  • Length:

    8 mm

  • Linearity Error-Max (EL):

    0.0061%

  • Moisture Sensitivity Level:

    3

  • Negative Supply Voltage-Nom:

    -15 V

  • Number of Bits:

    14

  • Number of Functions:

    1

  • Number of Terminals:

    56

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC56,.31SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1 mm

  • Settling Time-Max:

    30 µs

  • Settling Time-Nom (tstl):

    20 µs

  • Supply Voltage-Nom:

    15 V

  • Surface Mount:

    YES

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Width:

    8 mm

AD5361BCPZ Frequently Asked Questions (FAQs)

  • A good layout and routing practice for the AD5361BCPZ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the analog signal traces. Additionally, it's recommended to place the device close to the analog signal sources and to use shielding to reduce electromagnetic interference (EMI).
  • To calibrate the AD5361BCPZ, apply a known input voltage to the device and adjust the offset and gain trim pins to achieve the desired output code. It's recommended to use a high-precision voltage source and a digital multimeter to ensure accurate measurements. Refer to the datasheet for specific calibration procedures.
  • The maximum sampling rate of the AD5361BCPZ is 250 kSPS. However, the actual sampling rate may be limited by the system's clock frequency, the input signal's bandwidth, and the device's settling time. Increasing the sampling rate can improve the device's performance, but it may also increase the noise floor and reduce the signal-to-noise ratio (SNR).
  • The AD5361BCPZ has built-in overvoltage protection (OVP) and undervoltage protection (UVP) mechanisms. The OVP circuitry limits the input voltage to prevent damage from excessive voltage, while the UVP circuitry prevents the device from operating below the minimum specified voltage. Additionally, the device has a power-on reset (POR) circuit that ensures the device resets to a known state during power-up.
  • The typical power consumption of the AD5361BCPZ is 35 mW at 3 V supply voltage. To optimize power consumption, consider using a lower supply voltage, reducing the clock frequency, and using the device's power-down mode when not in use. Additionally, using a low-power microcontroller and optimizing the system's overall design can help minimize power consumption.

Trust Checks

This model has been verified by system checks.
System Verified
Sponsored

AD5361BCPZ Overview

Use the download button to access the AD5361BCPZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD536, or try a keyword search, such as Digital to Analog Converters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD5361BCPZ

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

AD5361BCPZ Alternates

Showing results

Image Part Number Model
Part Image AD5361BCPZ-REEL7 Analog Devices Inc

D/A Converter, 1 Func, Serial Input Loading, 20us Settling Time