Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AD6643BCPZRL7-200 - Analog Devices

Description: RF IC IF Receiver CDMA, CDMA2000, LTE, WiMAX Sample Rates to 200MSPS 64-LFCSP-VQ (9x9)

Download AD6643BCPZRL7-200 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AD6643BCPZRL7-200 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
AD6643BCPZRL7-200 - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - (CP-64-4)
click to zoom
3D Models
AD6643BCPZRL7-200 - Analog Devices - 3D model - Quad Flat No-Lead - (CP-64-4)
click to zoom

AD6643BCPZRL7-200 Details

  • Manufacturer Part Number:

    AD6643BCPZRL7-200

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFN

  • Package Description:

    LFCSP-64

  • Pin Count:

    64

  • Manufacturer Package Code:

    CP-64-4

  • Country Of Origin:

    Singapore

  • ECCN Code:

    5A991.B

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • JESD-30 Code:

    S-XQCC-N64

  • JESD-609 Code:

    e3

  • Length:

    9 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    2

  • Number of Terminals:

    64

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC64,.35SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1 mm

  • Supply Current-Max:

    0.26 mA

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Telecom IC Type:

    RF AND BASEBAND CIRCUIT

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    9 mm

AD6643BCPZRL7-200 Frequently Asked Questions (FAQs)

  • A good PCB layout is crucial for optimal performance of the AD6643. Analog Devices recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital signals separate. The datasheet provides a recommended PCB layout, and additional guidance can be found in the AD6643 evaluation board documentation.
  • The clock input should be a low-jitter, high-frequency clock signal (typically 1.2 GHz to 2.4 GHz). A clock signal with a high signal-to-noise ratio (SNR) is recommended. The clock input should be terminated with a 50-ohm resistor to match the impedance of the clock source. Additionally, the clock signal should be filtered to remove any high-frequency noise.
  • Proper power supply decoupling is essential for the AD6643. Analog Devices recommends using a combination of ceramic and electrolytic capacitors to decouple the power supplies. A 0.1 μF ceramic capacitor should be placed close to the power pin, and a 10 μF electrolytic capacitor should be placed further away. The power supply lines should also be filtered using a ferrite bead or a pi-filter.
  • The AD6643 has a parallel output interface that can be easily interfaced with a FPGA or ASIC. The output data is available in a 12-bit or 14-bit format, and the interface can be configured to use either a single-ended or differential output. The datasheet provides detailed information on the output interface timing and protocol. Additionally, Analog Devices provides evaluation boards and software development kits to help with the interface design.
  • The AD6643 is a commercial-grade device and is not specifically designed for radiation-hardened applications. However, Analog Devices provides some information on the radiation tolerance of the device in the datasheet. The device is tested for total ionizing dose (TID) and single-event effects (SEE), and the results are provided in the datasheet. For applications requiring high radiation tolerance, Analog Devices recommends using radiation-hardened devices.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD6643BCPZRL7-200 Overview

Use the download button to access the AD6643BCPZRL7-200 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD664, or try a keyword search, such as Cellular Telephone Circuits

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD6643BCPZRL7-200

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑