Part Image

AD8027ARTZ-REEL7 - Analog Devices

Description: Low Distortion, High Speed Rail-to-Rail Input/Output Amplifier

Download AD8027ARTZ-REEL7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AD8027ARTZ-REEL7 - Analog Devices PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - 6-Lead Small Outline Transistor Package
click to zoom
3D Models
AD8027ARTZ-REEL7 - Analog Devices  - 3D model - SOT23 (6-Pin) - 6-Lead Small Outline Transistor Package
click to zoom

AD8027ARTZ-REEL7 Details

  • Manufacturer Part Number:

    AD8027ARTZ-REEL7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Pin Count:

    6

  • Manufacturer Package Code:

    RJ-6

  • Country Of Origin:

    Malaysia, Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    6 µA

  • Bandwidth (3dB)-Nom:

    190 MHz

  • Common-mode Reject Ratio-Min:

    90 dB

  • Common-mode Reject Ratio-Nom:

    110 dB

  • Input Offset Voltage-Max:

    900 µV

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e4

  • Length:

    2.9 mm

  • Low-Offset:

    YES

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -6.3 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.45 mm

  • Slew Rate-Nom:

    90 V/us

  • Supply Voltage Limit-Max:

    6.3 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Wideband:

    NO

  • Width:

    1.6 mm

AD8027ARTZ-REEL7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the AD8027 involves keeping the input and output traces short and symmetrical, using a solid ground plane, and minimizing the distance between the op-amp and the decoupling capacitors. A 4-layer PCB with a dedicated ground plane is recommended.
  • The choice of gain resistors depends on the desired gain, bandwidth, and noise requirements. A good starting point is to use 1% or 0.1% tolerance resistors with a temperature coefficient of 25 ppm/°C or better. The resistor values should be chosen to achieve the desired gain while minimizing noise and distortion.
  • The maximum power dissipation of the AD8027 is 1.4 W, which is calculated based on the maximum junction temperature of 150°C and the thermal resistance of the package. The actual power dissipation will depend on the operating conditions, such as supply voltage, output current, and ambient temperature.
  • Yes, the AD8027 can be used as a single-ended amplifier by tying the inverting input to ground and applying the input signal to the non-inverting input. However, this will reduce the common-mode rejection ratio and may affect the noise performance.
  • To reduce noise and distortion in an AD8027 circuit, use a low-noise power supply, decouple the power pins with 10 μF and 0.1 μF capacitors, and use a low-ESR capacitor for the output filter. Additionally, minimize the length of the input and output traces, and use a shielded cable for the input signal.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8027ARTZ-REEL7 Overview

Use the download button to access the AD8027ARTZ-REEL7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD802, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8027ARTZ-REEL7

Showing 0 results

AD8027ARTZ-REEL7 Alternates

Showing results

Image Part Number Model
Part Image AD8027ARTZ-R2 Analog Devices Inc

Operational Amplifier, 1 Func, 900uV Offset-Max, 190MHz Band Width, BIPolar, PDSO6

Part Image AD8027ART-REEL7 Analog Devices Inc

Operational Amplifier, 1 Func, 900uV Offset-Max, 190MHz Band Width, PDSO6

Part Image AD8027ARTZ-REEL Analog Devices Inc

Operational Amplifier, 1 Func, 900uV Offset-Max, 190MHz Band Width, PDSO6

Part Image AD8027ART-REEL Analog Devices Inc

Operational Amplifier, 1 Func, 900uV Offset-Max, 190MHz Band Width, PDSO6

Part Image AD8027ART-R2 Analog Devices Inc

Operational Amplifier, 1 Func, 900uV Offset-Max, 190MHz Band Width, PDSO6

For a full list of alternate parts for AD8027ARTZ-REEL7, check out Findchips.com