Part Image

AD8067ART-REEL7 - Analog Devices

Description: IC OPAMP VFB 54MHZ RRO SOT23-5

Download AD8067ART-REEL7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AD8067ART-REEL7 - Analog Devices PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - RJ-5 (SOT23)_2022
click to zoom
3D Models
AD8067ART-REEL7 - Analog Devices  - 3D model - SOT23 (5-Pin) - RJ-5 (SOT23)_2022
click to zoom

AD8067ART-REEL7 Details

  • Manufacturer Part Number:

    AD8067ART-REEL7

  • Pbfree Code:

    No

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    PLASTIC, MO-178AA, SOT-23, 5 PIN

  • Pin Count:

    5

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.000005 µA

  • Bias Current-Max (IIB) @25C:

    0.000005 µA

  • Common-mode Reject Ratio-Min:

    85 dB

  • Common-mode Reject Ratio-Nom:

    106 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    1000 µV

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e0

  • Length:

    2.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -12 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    240

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.45 mm

  • Slew Rate-Min:

    390 V/us

  • Slew Rate-Nom:

    640 V/us

  • Supply Current-Max:

    6.8 mA

  • Supply Voltage Limit-Max:

    12 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    TIN LEAD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Unity Gain BW-Nom:

    300000

  • Voltage Gain-Min:

    100000

  • Wideband:

    NO

  • Width:

    1.6 mm

AD8067ART-REEL7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the AD8067 involves keeping the input and output traces short and away from each other, using a solid ground plane, and decoupling the power supply pins with capacitors. A 4-layer PCB with a dedicated ground plane is recommended.
  • The gain resistors for the AD8067 should be chosen based on the desired gain and bandwidth. A good starting point is to use 1 kΩ to 10 kΩ resistors for gains up to 10, and 100 Ω to 1 kΩ resistors for gains above 10. The resistors should also be matched to within 0.1% to ensure good common-mode rejection.
  • The maximum power dissipation for the AD8067 is 670 mW, which is calculated based on the maximum junction temperature of 150°C and the thermal resistance of the package. The actual power dissipation will depend on the operating conditions and the ambient temperature.
  • Yes, the AD8067 can be used as a single-ended to differential converter. A common configuration is to use the op-amp in a differential amplifier configuration with a gain of 2, and then use a resistive divider to convert the single-ended input to a differential signal.
  • To reduce noise and oscillations in the AD8067 circuit, use a low-noise power supply, decouple the power supply pins with capacitors, and use a solid ground plane. Additionally, use a low-pass filter at the input and output, and consider adding a ferrite bead or a series resistor to the output to reduce high-frequency oscillations.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8067ART-REEL7 Overview

Use the download button to access the AD8067ART-REEL7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD806, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8067ART-REEL7

Showing 0 results

AD8067ART-REEL7 Alternates

Showing results

Image Part Number Model
Part Image AD8067ART-R2 Analog Devices Inc

Operational Amplifier, 1 Func, 1000uV Offset-Max, BIPolar, PDSO5

Part Image AD8067ARTZ-R2 Rochester Electronics LLC

OP-AMP, 1000 uV OFFSET-MAX, PDSO5, ROHS COMPLIANT, MO-178AA, SOT-23, 5 PIN

Part Image AD8067ARTZ-REEL Analog Devices Inc

Operational Amplifier, 1 Func, 1000uV Offset-Max, BIPolar, PDSO5

Part Image AD8067ART-REEL Analog Devices Inc

Operational Amplifier, 1 Func, 1000uV Offset-Max, BIPolar, PDSO5

Part Image AD8067ARTZ-R2 Analog Devices Inc

Operational Amplifier, 1 Func, 1000uV Offset-Max, BIPolar, PDSO5

For a full list of alternate parts for AD8067ART-REEL7, check out Findchips.com