Part Image

AD8099ARDZ-REEL - Analog Devices

Description: Ultralow Distortion, High Speed 0.95nV/√Hz Voltage Noise Op Amp

Download AD8099ARDZ-REEL Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AD8099ARDZ-REEL - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - RD-8-1
click to zoom
3D Models
AD8099ARDZ-REEL - Analog Devices  - 3D model - Small Outline Packages - RD-8-1
click to zoom

AD8099ARDZ-REEL Details

  • Manufacturer Part Number:

    AD8099ARDZ-REEL

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    RD-8-1

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    13 µA

  • Bias Current-Max (IIB) @25C:

    13 µA

  • Common-mode Reject Ratio-Min:

    98 dB

  • Common-mode Reject Ratio-Nom:

    105 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    500 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Low-Bias:

    NO

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    3

  • Neg Supply Voltage Limit-Max:

    -6.3 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HSOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    340 V/us

  • Slew Rate-Nom:

    1350 V/us

  • Supply Current-Max:

    16 mA

  • Supply Voltage Limit-Max:

    6.3 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    3800000

  • Voltage Gain-Min:

    6300

  • Wideband:

    YES

  • Width:

    3.9 mm

AD8099ARDZ-REEL Frequently Asked Questions (FAQs)

  • A good PCB layout for the AD8099 involves keeping the input and output traces short and away from each other, using a solid ground plane, and decoupling the power supply pins with capacitors. A 4-layer PCB with a dedicated ground plane is recommended.
  • The gain resistors (Rf and Rg) should be chosen based on the desired gain and bandwidth of the amplifier. A higher gain requires smaller resistors, while a higher bandwidth requires larger resistors. The datasheet provides a gain resistor selection table to help with this process.
  • The maximum power dissipation of the AD8099 is dependent on the ambient temperature and the thermal resistance of the package. For the AD8099ARDZ-REEL, the maximum power dissipation is approximately 670mW at 25°C ambient temperature.
  • Yes, the AD8099 can be used as a single-ended to differential converter by connecting the input signal to the non-inverting input and grounding the inverting input. The output will be a differential signal with a common-mode voltage of VCC/2.
  • To reduce noise and distortion, use a low-noise power supply, decouple the power supply pins with capacitors, and use a low-ESR capacitor for the output filter. Additionally, minimize the length of the input and output traces, and avoid routing them near noise sources.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8099ARDZ-REEL Overview

Use the download button to access the AD8099ARDZ-REEL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD809, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8099ARDZ-REEL

Showing 0 results

AD8099ARDZ-REEL Alternates

Showing results

Image Part Number Model
Part Image AD8099ARDZ-REEL7 Analog Devices Inc

Operational Amplifier, 1 Func, 500uV Offset-Max, BIPolar, PDSO8

Part Image AD8099ARDZ-REEL7 Rochester Electronics LLC

OP-AMP, 500 uV OFFSET-MAX, PDSO8, ROHS COMPLIANT, MS-012, SOIC-8

Part Image AD8099ARD-REEL Rochester Electronics LLC

OP-AMP, 500 uV OFFSET-MAX, PDSO8, MS-012, SOIC-8

Part Image AD8099ARD-REEL7 Analog Devices Inc

Operational Amplifier, 1 Func, 500uV Offset-Max, BIPolar, PDSO8

Part Image AD8099ARD Analog Devices Inc

Operational Amplifier, 1 Func, 500uV Offset-Max, BIPolar, PDSO8

For a full list of alternate parts for AD8099ARDZ-REEL, check out Findchips.com