Part Image

AD8552ARZ-REEL7 - Analog Devices

Description: Zero-Drift, Single-Supply, RRIO Dual Op Amp

Download AD8552ARZ-REEL7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AD8552ARZ-REEL7 - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - R-8 (SOIC)--
click to zoom
3D Models
AD8552ARZ-REEL7 - Analog Devices  - 3D model - Small Outline Packages - R-8 (SOIC)--
click to zoom

AD8552ARZ-REEL7 Details

  • Manufacturer Part Number:

    AD8552ARZ-REEL7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Package Description:

    ROHS COMPLIANT, MS-012AA, SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    R-8

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    CHOPPER-STAB

  • Average Bias Current-Max (IIB):

    0.004 µA

  • Bias Current-Max (IIB) @25C:

    0.00005 µA

  • Common-mode Reject Ratio-Min:

    115 dB

  • Common-mode Reject Ratio-Nom:

    130 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    10 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    0.4 V/us

  • Supply Current-Max:

    2.15 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    1500

  • Voltage Gain-Min:

    177000

  • Wideband:

    NO

  • Width:

    3.9 mm

AD8552ARZ-REEL7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the AD8552ARZ involves keeping the input traces as short as possible, using a solid ground plane, and minimizing the distance between the device and the analog power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated analog ground plane to reduce noise and improve performance.
  • To ensure proper biasing, make sure to connect the VREF pin to a stable voltage reference, and the VCC pin to a clean analog power supply. Also, ensure that the input common-mode voltage is within the recommended range of 1.5V to 3.5V, and that the output load is within the recommended range of 1kΩ to 10kΩ.
  • The recommended input signal range for the AD8552ARZ is ±10V, with a maximum input voltage of ±12V. However, the device can tolerate input voltages up to ±15V without damage, but with reduced accuracy and linearity.
  • To minimize noise and interference, use a low-pass filter at the input, keep the input traces as short as possible, and use a shielded cable or twisted pair wiring for the input signals. Additionally, use a decoupling capacitor (e.g., 10nF) between the VCC pin and ground to reduce power supply noise.
  • The typical settling time of the AD8552ARZ is around 10μs to 15μs, depending on the input signal frequency and amplitude. However, this can vary depending on the specific application and PCB layout.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8552ARZ-REEL7 Overview

Use the download button to access the AD8552ARZ-REEL7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD855, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8552ARZ-REEL7

Showing 0 results

AD8552ARZ-REEL7 Alternates

Showing results

Image Part Number Model
Part Image AD8552ARZ Rochester Electronics LLC

DUAL OP-AMP, 10 uV OFFSET-MAX, 1.5 MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, MS-012AA, SOIC-8

Part Image AD8552ARZ-REEL7 Rochester Electronics LLC

DUAL OP-AMP, 10 uV OFFSET-MAX, 1.5 MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, MS-012AA, SOIC-8

Part Image AD8552AR Analog Devices Inc

Operational Amplifier, 2 Func, 10uV Offset-Max, CMOS, PDSO8

Part Image AD8552AR-REEL Analog Devices Inc

Operational Amplifier, 2 Func, 10uV Offset-Max, CMOS, PDSO8