Part Image

AD8601WDRTZ-REEL - Analog Devices

Description: Input/Output Wideband Operational Amplifiers

Download AD8601WDRTZ-REEL Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AD8601WDRTZ-REEL - Analog Devices PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - RJ-5 (SOT23)_2
click to zoom
3D Models
AD8601WDRTZ-REEL - Analog Devices  - 3D model - SOT23 (5-Pin) - RJ-5 (SOT23)_2
click to zoom

AD8601WDRTZ-REEL Details

  • Manufacturer Part Number:

    AD8601WDRTZ-REEL

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Pin Count:

    5

  • Manufacturer Package Code:

    RJ-5

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.001 µA

  • Bias Current-Max (IIB) @25C:

    0.0002 µA

  • Common-mode Reject Ratio-Min:

    52 dB

  • Common-mode Reject Ratio-Nom:

    65 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    7000 µV

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e3

  • Length:

    2.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1.45 mm

  • Slew Rate-Nom:

    5.2 V/us

  • Supply Current-Max:

    1.5 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    8200

  • Voltage Gain-Min:

    20000

  • Wideband:

    NO

  • Width:

    1.6 mm

AD8601WDRTZ-REEL Frequently Asked Questions (FAQs)

  • A good PCB layout for the AD8601 involves keeping the input and output traces short and away from noise sources, using a solid ground plane, and decoupling the power supply pins with capacitors. A 4-layer PCB with a dedicated analog ground plane is recommended.
  • The gain resistor (Rg) value depends on the desired gain and the input impedance of the circuit. A higher Rg value results in higher gain, but also increases noise and input impedance. A good starting point is to use the recommended Rg value in the datasheet and adjust based on the specific application requirements.
  • The maximum power dissipation of the AD8601 is 1.4W, which is calculated based on the maximum junction temperature (TJ) of 150°C and the thermal resistance (θJA) of 125°C/W. However, it's recommended to keep the power dissipation below 0.5W to ensure reliable operation.
  • Yes, the AD8601 can be used as a single-ended amplifier by tying the negative input to ground or a fixed voltage. However, this will reduce the common-mode rejection ratio (CMRR) and increase the noise. It's recommended to use the AD8601 in a differential configuration for optimal performance.
  • To protect the AD8601 from EMI, use a shielded enclosure, keep the input and output traces short, and use a common-mode choke or ferrite bead on the input lines. Additionally, use a low-pass filter or a shielded cable to connect the input signals to the AD8601.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8601WDRTZ-REEL Overview

Use the download button to access the AD8601WDRTZ-REEL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD860, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8601WDRTZ-REEL

Showing 0 results

AD8601WDRTZ-REEL Alternates

Showing results

Image Part Number Model
Part Image AD8601WDRTZ Analog Devices Inc

Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO5

Part Image AD8601DRT-REEL7 Analog Devices Inc

Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO5

Part Image AD8601DRTZ-R2 Analog Devices Inc

Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO5

Part Image AD8601DRTZ-REEL Analog Devices Inc

Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO5

Part Image AD8601DRT-R2 Analog Devices Inc

Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO5

For a full list of alternate parts for AD8601WDRTZ-REEL, check out Findchips.com