Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AD8604WARZ-RL - Analog Devices

Description: ADI DigiTrim RRIO Quad Op Amp with Very Low Offset Voltage

Download AD8604WARZ-RL Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AD8604WARZ-RL - Analog Devices - PCB symbol
click to zoom
PCB Footprints
AD8604WARZ-RL - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - soic_14
click to zoom
3D Models
AD8604WARZ-RL - Analog Devices - 3D model - Small Outline Packages - soic_14
click to zoom

AD8604WARZ-RL Details

  • Manufacturer Part Number:

    AD8604WARZ-RL

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SOIC-14

  • Pin Count:

    14

  • Manufacturer Package Code:

    R-14

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.001 µA

  • Bias Current-Max (IIB) @25C:

    0.00006 µA

  • Common-mode Reject Ratio-Min:

    68 dB

  • Common-mode Reject Ratio-Nom:

    83 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    2400 µV

  • JESD-30 Code:

    R-PDSO-G14

  • Length:

    8.65 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    14

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP14,.23

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUT LINE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    5.2 V/us

  • Supply Current-Max:

    5.2 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    8200

  • Voltage Gain-Min:

    30000

  • Wideband:

    NO

  • Width:

    3.9 mm

AD8604WARZ-RL Frequently Asked Questions (FAQs)

  • A good layout and PCB design for the AD8604 involves keeping the input and output traces short and away from noise sources, using a solid ground plane, and decoupling the power supply pins with capacitors. A 4-layer PCB with a dedicated analog ground plane is recommended. See the AD8604 datasheet and Analog Devices' PCB design guidelines for more information.
  • The choice of gain resistors depends on the desired gain, bandwidth, and noise requirements of your application. A good starting point is to use the gain resistor values recommended in the AD8604 datasheet. You can also use online calculators or simulation tools to determine the optimal resistor values for your specific application.
  • The maximum power dissipation of the AD8604 is 670mW. To ensure it doesn't overheat, make sure to provide adequate heat sinking, such as a thermal pad or a heat sink, and keep the ambient temperature below 85°C. You can also use thermal simulation tools to estimate the junction temperature and ensure it stays within the recommended operating range.
  • Yes, the AD8604 can be used as a single-supply op-amp. To configure it, connect the negative supply pin (V-) to ground, and use a voltage divider or a reference voltage to set the input common-mode voltage. You may also need to add a pull-down resistor to the output to ensure it stays within the desired output voltage range.
  • To troubleshoot common issues with the AD8604, start by checking the PCB layout and design for any errors or noise sources. Ensure that the power supply is clean and well-regulated, and that the input and output traces are properly terminated. You can also use simulation tools or oscilloscopes to analyze the circuit behavior and identify the root cause of the issue.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8604WARZ-RL Overview

Use the download button to access the AD8604WARZ-RL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD860, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8604WARZ-RL

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑