Part Image

AD8605ACBZ-REEL7 - Analog Devices

Description: Precision Amplifiers 56972995PRECISION CMOS RAIL-RAIL OP AMP

Download AD8605ACBZ-REEL7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AD8605ACBZ-REEL7 - Analog Devices PCB footprint - Other - Other - AD8605ACBZ-REEL7-5
click to zoom
3D Models
AD8605ACBZ-REEL7 - Analog Devices  - 3D model - Other - AD8605ACBZ-REEL7-5
click to zoom

AD8605ACBZ-REEL7 Details

  • Manufacturer Part Number:

    AD8605ACBZ-REEL7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    BGA

  • Package Description:

    WLCSP-5

  • Pin Count:

    5

  • Manufacturer Package Code:

    CB-5-1

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.00025 µA

  • Bias Current-Max (IIB) @25C:

    0.000001 µA

  • Common-mode Reject Ratio-Min:

    75 dB

  • Common-mode Reject Ratio-Nom:

    90 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    750 µV

  • JESD-30 Code:

    R-PBGA-B5

  • JESD-609 Code:

    e1

  • Length:

    1.29 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    VFBGA

  • Package Equivalence Code:

    BGA5,3X3,17/10

  • Package Shape:

    RECTANGULAR

  • Package Style:

    GRID ARRAY, VERY THIN PROFILE, FINE PITCH

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.54 mm

  • Slew Rate-Nom:

    5 V/us

  • Supply Current-Max:

    1.5 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Tin/Silver/Copper (Sn/Ag/Cu)

  • Terminal Form:

    BALL

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    BOTTOM

  • Unity Gain BW-Nom:

    10000

  • Voltage Gain-Min:

    110000

  • Wideband:

    NO

  • Width:

    0.9 mm

AD8605ACBZ-REEL7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the AD8605 involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated analog ground plane is recommended.
  • The gain resistor (Rg) value depends on the desired gain and the input impedance of the circuit. A higher Rg value increases the gain, but also increases the noise and distortion. A good starting point is to use the recommended Rg value from the datasheet and adjust it based on the specific application requirements.
  • The maximum power dissipation of the AD8605 is 670mW, which is calculated based on the maximum junction temperature (TJ) of 150°C and the thermal resistance (θJA) of 125°C/W. However, it's recommended to keep the power dissipation below 500mW to ensure reliable operation.
  • Yes, the AD8605 can be used as a single-ended amplifier by tying the negative input to ground and using the positive input as the signal input. However, this configuration may compromise the noise performance and common-mode rejection ratio (CMRR) of the amplifier.
  • The AD8605 has a built-in low-pass filter that can be used to filter out high-frequency noise. Additionally, external filters such as RC filters or active filters can be used to further reduce noise. It's also recommended to use a low-pass filter on the input signal to prevent aliasing.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8605ACBZ-REEL7 Overview

Use the download button to access the AD8605ACBZ-REEL7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD860, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8605ACBZ-REEL7

Showing 0 results

AD8605ACBZ-REEL7 Alternates

Showing results

Image Part Number Model
Part Image AD8605ACB-REEL7 Rochester Electronics LLC

OP-AMP, 750uV OFFSET-MAX, 9MHz BAND WIDTH, PBGA5, WLCSP-5

Part Image AD8605ACB-R2 Analog Devices Inc

Operational Amplifier, 1 Func, 750uV Offset-Max, CMOS, PBGA5

Part Image AD8605ACBZ-REEL Analog Devices Inc

Operational Amplifier, 1 Func, 750uV Offset-Max, CMOS, PBGA5

Part Image AD8605ACB-REEL7 Analog Devices Inc

Operational Amplifier, 1 Func, 750uV Offset-Max, CMOS, PBGA5