Part Image

AD8605ARTZ-REEL - Analog Devices

Description: Op Amp Single Low Noise Amplifier R-R I/O 5.5V 5-Pin SOT-23 T/R

Download AD8605ARTZ-REEL Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AD8605ARTZ-REEL - Analog Devices PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - RJ-5
click to zoom
3D Models
AD8605ARTZ-REEL - Analog Devices  - 3D model - SOT23 (5-Pin) - RJ-5
click to zoom

AD8605ARTZ-REEL Details

  • Manufacturer Part Number:

    AD8605ARTZ-REEL

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Package Description:

    SOT-23, 5 PIN

  • Pin Count:

    5

  • Manufacturer Package Code:

    RJ-5

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.00025 µA

  • Bias Current-Max (IIB) @25C:

    0.000001 µA

  • Common-mode Reject Ratio-Min:

    75 dB

  • Common-mode Reject Ratio-Nom:

    90 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    750 µV

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e3

  • Length:

    2.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.45 mm

  • Slew Rate-Nom:

    5 V/us

  • Supply Current-Max:

    1.5 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    10000

  • Voltage Gain-Min:

    110000

  • Wideband:

    NO

  • Width:

    1.6 mm

AD8605ARTZ-REEL Frequently Asked Questions (FAQs)

  • A good PCB layout for the AD8605 involves keeping the input and output traces short and away from noise sources, using a solid ground plane, and decoupling the power supply pins with 0.1uF and 10uF capacitors.
  • The gain resistor (Rg) value depends on the desired gain and the input impedance of the amplifier. A higher Rg value results in higher gain, but also increases noise and input impedance. A good starting point is to use the recommended Rg value from the datasheet and adjust based on the specific application requirements.
  • The maximum power dissipation of the AD8605 is 670mW, which is calculated based on the maximum junction temperature (150°C) and the thermal resistance of the package (125°C/W).
  • Yes, the AD8605 can be used as a single-ended amplifier by tying the inverting input to ground and using the non-inverting input as the signal input. However, this configuration will have a lower common-mode rejection ratio (CMRR) compared to a differential configuration.
  • To reduce noise and EMI, use a low-noise power supply, decouple the power supply pins, keep the input and output traces short and away from noise sources, and use shielding or a metal enclosure to reduce electromagnetic radiation.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8605ARTZ-REEL Overview

Use the download button to access the AD8605ARTZ-REEL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD860, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8605ARTZ-REEL

Showing 0 results

AD8605ARTZ-REEL Alternates

Showing results

Image Part Number Model
Part Image AD8605ARTZ-REEL Rochester Electronics LLC

OP-AMP, 750 uV OFFSET-MAX, 10 MHz BAND WIDTH, PDSO5, ROHS COMPLIANT, MO-178AA, SOT-23, 5 PIN

Part Image AD8605ART-REEL7 Analog Devices Inc

Operational Amplifier, 1 Func, 750uV Offset-Max, CMOS, PDSO5

Part Image AD8605ART-R2 Analog Devices Inc

Operational Amplifier, 1 Func, 750uV Offset-Max, CMOS, PDSO5

Part Image AD8605ART-REEL Analog Devices Inc

Operational Amplifier, 1 Func, 750uV Offset-Max, CMOS, PDSO5

Part Image AD8605ART Analog Devices Inc

Operational Amplifier, 1 Func, 750uV Offset-Max, CMOS, PDSO5

For a full list of alternate parts for AD8605ARTZ-REEL, check out Findchips.com