Part Image

AD8628ARZ-REEL7 - Analog Devices

Description: Precision Amplifiers Zero-Drift RRIO SGL-Supply

Download AD8628ARZ-REEL7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AD8628ARZ-REEL7 - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - R-8 (SOIC)
click to zoom
3D Models
AD8628ARZ-REEL7 - Analog Devices  - 3D model - Small Outline Packages - R-8 (SOIC)
click to zoom

AD8628ARZ-REEL7 Details

  • Manufacturer Part Number:

    AD8628ARZ-REEL7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    R-8

  • Country Of Origin:

    Mainland China

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    CHOPPER-STAB

  • Average Bias Current-Max (IIB):

    0.0015 µA

  • Bias Current-Max (IIB) @25C:

    0.0001 µA

  • Common-mode Reject Ratio-Min:

    115 dB

  • Common-mode Reject Ratio-Nom:

    130 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    10 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    1 V/us

  • Supply Current-Max:

    1.2 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    2500

  • Voltage Gain-Min:

    178000

  • Wideband:

    NO

  • Width:

    3.9 mm

AD8628ARZ-REEL7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the AD8628ARZ-REEL7 involves keeping the input and output traces short and separate, using a ground plane, and placing decoupling capacitors close to the op-amp. A 4-layer PCB with a dedicated ground plane is recommended.
  • The gain resistors for the AD8628ARZ-REEL7 should be chosen based on the desired gain and bandwidth. A higher gain requires lower resistor values, but may compromise bandwidth. A good starting point is to use 1 kΩ to 10 kΩ resistors, and then adjust based on the specific application requirements.
  • The maximum power dissipation for the AD8628ARZ-REEL7 is 670 mW. To prevent overheating, ensure good airflow, use a heat sink if necessary, and keep the ambient temperature below 85°C. Also, minimize the output current and voltage swing to reduce power consumption.
  • Yes, the AD8628ARZ-REEL7 can be used as a unity-gain buffer. However, this may compromise the op-amp's noise performance and bandwidth. A unity-gain buffer configuration can also increase the output impedance, which may affect the overall circuit performance.
  • To filter out high-frequency noise and oscillations, use a low-pass filter or a ferrite bead in series with the op-amp's output. Additionally, ensure proper PCB layout, decoupling, and bypassing to minimize noise coupling and radiation.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8628ARZ-REEL7 Overview

Use the download button to access the AD8628ARZ-REEL7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD862, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8628ARZ-REEL7

Showing 0 results

AD8628ARZ-REEL7 Alternates

Showing results

Image Part Number Model
Part Image AD8628ARZ Analog Devices Inc

Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO8

Part Image AD8628WARZ-R7 Analog Devices Inc

Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO8

Part Image AD8628ARZ Rochester Electronics LLC

OP-AMP, 10 uV OFFSET-MAX, 2.5 MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, PLASTIC, MS-012AA, SOIC-8

Part Image AD8628AR Analog Devices Inc

Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO8

Part Image AD8628AR-REEL Analog Devices Inc

Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, PDSO8

For a full list of alternate parts for AD8628ARZ-REEL7, check out Findchips.com