Part Image

AD8652ARZ-REEL - Analog Devices

Description: 50 MHz, Precision Low Distortion, Low Noise CMOS Dual Op Amp

Download AD8652ARZ-REEL Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AD8652ARZ-REEL - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - R-8 (SOIC)
click to zoom
3D Models
AD8652ARZ-REEL - Analog Devices  - 3D model - Small Outline Packages - R-8 (SOIC)
click to zoom

AD8652ARZ-REEL Details

  • Manufacturer Part Number:

    AD8652ARZ-REEL

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    R-8

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.0006 µA

  • Bias Current-Max (IIB) @25C:

    0.00001 µA

  • Common-mode Reject Ratio-Min:

    77 dB

  • Common-mode Reject Ratio-Nom:

    95 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    1700 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    41 V/us

  • Supply Current-Max:

    23.5 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    40

  • Unity Gain BW-Nom:

    50000

  • Voltage Gain-Min:

    56000

  • Wideband:

    NO

  • Width:

    3.9 mm

AD8652ARZ-REEL Frequently Asked Questions (FAQs)

  • A good PCB layout for the AD8652ARZ-REEL involves keeping the input and output traces short and away from noise sources, using a solid ground plane, and decoupling the power supplies with capacitors. A 4-layer PCB with a dedicated ground plane is recommended.
  • The gain resistors for the AD8652ARZ-REEL should be chosen based on the desired gain and bandwidth. A good starting point is to use 1% or 0.1% tolerance resistors with a value between 1 kΩ and 100 kΩ. The datasheet provides a gain resistor selection table to help with this process.
  • The maximum power dissipation for the AD8652ARZ-REEL is 1.4 W, which is calculated based on the maximum junction temperature (150°C) and the thermal resistance of the package (125°C/W). The actual power dissipation will depend on the operating conditions and the PCB layout.
  • Yes, the AD8652ARZ-REEL can be used in a single-supply configuration, but the input common-mode range is limited to VCC - 1.5 V to VCC + 0.5 V. The output voltage swing will also be reduced in single-supply operation. A voltage divider or a voltage reference can be used to set the input common-mode voltage.
  • The AD8652ARZ-REEL has built-in ESD protection, but it's still important to follow proper handling and assembly procedures to prevent ESD damage. Use an ESD wrist strap or mat, and ensure that the PCB is properly grounded during assembly. Avoid touching the device pins or exposed internal components.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8652ARZ-REEL Overview

Use the download button to access the AD8652ARZ-REEL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD865, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8652ARZ-REEL

Showing 0 results

AD8652ARZ-REEL Alternates

Showing results

Image Part Number Model
Part Image AD8652ARZ Analog Devices Inc

Operational Amplifier, 1 Func, 1700uV Offset-Max, CMOS, PDSO8

Part Image AD8652ARZ-REEL Rochester Electronics LLC

OP-AMP, 1700uV OFFSET-MAX, 50MHz BAND WIDTH, PDSO8, LEAD FREE, MS-012AA, SOIC-8

Part Image AD8652ARZ Rochester Electronics LLC

OP-AMP, 1700uV OFFSET-MAX, 50MHz BAND WIDTH, PDSO8, LEAD FREE, MS-012AA, SOIC-8