Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AD8663ACPZ-R2 - Analog Devices

Description: Analog Devices AD8663ACPZ-R2 Low Noise Op Amp, 540kHz Rail-Rail, 5 → 16 V, 8-Pin LFCSP

Download AD8663ACPZ-R2 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AD8663ACPZ-R2 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
AD8663ACPZ-R2 - Analog Devices PCB footprint - Small Outline No-lead - Small Outline No-lead - CP-8-13 (LFCSP)
click to zoom
3D Models
AD8663ACPZ-R2 - Analog Devices - 3D model - Small Outline No-lead - CP-8-13 (LFCSP)
click to zoom

AD8663ACPZ-R2 Details

  • Manufacturer Part Number:

    AD8663ACPZ-R2

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SON

  • Package Description:

    3 X 3 MM, ROHS COMPLIANT, LFCSP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    CP-8-13

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.000045 µA

  • Bias Current-Max (IIB) @25C:

    0.00012 µA

  • Common-mode Reject Ratio-Min:

    76 dB

  • Common-mode Reject Ratio-Nom:

    100 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    175 µV

  • JESD-30 Code:

    R-XDSO-N8

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    VSON

  • Package Equivalence Code:

    SOLCC8,.11,20

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, VERY THIN PROFILE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.9 mm

  • Slew Rate-Min:

    0.3 V/us

  • Slew Rate-Nom:

    0.26 V/us

  • Supply Current-Max:

    0.71 mA

  • Supply Voltage Limit-Max:

    9 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Unity Gain BW-Nom:

    520

  • Voltage Gain-Min:

    106000

  • Wideband:

    NO

  • Width:

    3 mm

AD8663ACPZ-R2 Frequently Asked Questions (FAQs)

  • The recommended power-up sequence is to apply the power supplies (V+ and V-) before applying the input signals. This ensures that the internal biasing circuitry is established before the input signals are applied.
  • To minimize noise and ensure optimal performance, it is recommended to follow good PCB layout practices such as separating analog and digital grounds, using a solid ground plane, and keeping sensitive analog signals away from noisy digital signals. Additionally, it is recommended to place the op-amp close to the signal source and use short, direct traces to minimize parasitic inductance and capacitance.
  • The AD8663 can drive capacitive loads up to 1nF without oscillation or instability. However, it is recommended to use a series resistor (Rs) to dampen the capacitive load and prevent oscillation. The value of Rs can be calculated using the formula Rs = 10/(Cload * fcorner), where Cload is the capacitive load and fcorner is the frequency at which the phase margin is 45 degrees.
  • The choice of gain resistors depends on the desired gain and bandwidth of the amplifier. The gain resistors should be chosen to ensure that the amplifier operates within its specified bandwidth and does not exceed its maximum output current. A good starting point is to use the recommended gain resistors from the datasheet, and then adjust them as needed to achieve the desired performance.
  • The AD8663's performance is affected by temperature, with changes in offset voltage, gain, and bandwidth. The datasheet provides temperature coefficients for these parameters, which can be used to estimate the performance over temperature. It is recommended to consider the temperature range of the application and to use temperature compensation techniques if necessary.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8663ACPZ-R2 Overview

Use the download button to access the AD8663ACPZ-R2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD866, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8663ACPZ-R2

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

AD8663ACPZ-R2 Alternates

Showing results

Image Part Number Model
Part Image AD8663ACPZ-REEL7 Rochester Electronics LLC

OP-AMP, 175 uV OFFSET-MAX, 0.52 MHz BAND WIDTH, DSO8, 3 X 3 MM, ROHS COMPLIANT, LFCSP-8
Part Image AD8663ACPZ-R2 Rochester Electronics LLC

OP-AMP, 175 uV OFFSET-MAX, 0.52 MHz BAND WIDTH, DSO8, 3 X 3 MM, ROHS COMPLIANT, LFCSP-8
Part Image AD8663ACPZ-RL Analog Devices Inc

Operational Amplifier, 1 Func, 350uV Offset-Max, CMOS, PDSO8
Part Image AD8663ACPZ-REEL Analog Devices Inc

Operational Amplifier, 1 Func, 175uV Offset-Max, CMOS
Part Image AD8663ACPZ-R7 Analog Devices Inc

Operational Amplifier, 1 Func, 350uV Offset-Max, CMOS, PDSO8
For a full list of alternate parts for AD8663ACPZ-R2, check out Findchips.com