Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AD9139BCPZRL - Analog Devices

Description: Selectable 1× or 2× interpolation filter Support input signal bandwidth up to 575 MHz Very small inherent latency variation: <2 DAC clock cycles Proprietary low spurious and distortion design 6-carrier GSM ACLR = 79 dBc at 200 MHz IF SFDR >85 dBc (bandwidth = 300 MHz) at zero IF Flexible 16-bit LVDS interface Supports word and byte load Multiple chip synchronization Fixed latency and data generator latency compensation FIFO eases system timing and includes error detection High performance, low no

Download AD9139BCPZRL Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AD9139BCPZRL - Analog Devices - PCB symbol
click to zoom
PCB Footprints
AD9139BCPZRL - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 72-[LFCSP]10 x 10 mm Body and 0.85 mm Package Height (CP-72-7)
click to zoom
3D Models
AD9139BCPZRL - Analog Devices - 3D model - Quad Flat No-Lead - 72-[LFCSP]10 x 10 mm Body and 0.85 mm Package Height (CP-72-7)
click to zoom

AD9139BCPZRL Details

  • Manufacturer Part Number:

    AD9139BCPZRL

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Pin Count:

    72

  • Manufacturer Package Code:

    CP-72-7

  • Country Of Origin:

    Singapore

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Analog Output Voltage-Max:

    1 V

  • Analog Output Voltage-Min:

    -1 V

  • Converter Type:

    D/A CONVERTER

  • Input Bit Code:

    BINARY, 2'S COMPLEMENT BINARY

  • Input Format:

    SERIAL

  • JESD-30 Code:

    S-XQCC-N72

  • JESD-609 Code:

    e3

  • Length:

    10 mm

  • Moisture Sensitivity Level:

    3

  • Number of Bits:

    16

  • Number of Functions:

    1

  • Number of Terminals:

    72

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC72,.39SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1 mm

  • Settling Time-Nom (tstl):

    0.02 µs

  • Supply Current-Max:

    26.6 mA

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Width:

    10 mm

AD9139BCPZRL Frequently Asked Questions (FAQs)

  • The AD9139BCPZRL requires careful PCB layout and thermal management to achieve optimal performance. A 4-layer PCB with a solid ground plane and a thermal pad connected to a heat sink is recommended. The device should be placed in a way that allows for good airflow and heat dissipation.
  • The AD9139BCPZRL requires a high-quality clock source with low jitter and phase noise. A clock frequency of 1.5 GHz to 2.5 GHz is recommended, and the device should be synchronized using the SYNC_IN pin. The clock signal should be routed close to the device and terminated with a 50-ohm resistor.
  • The recommended power-up sequence is to apply the analog supply voltage (AVDD) first, followed by the digital supply voltage (DVDD). The power-down sequence should be reversed, with DVDD turned off first, followed by AVDD. This ensures that the device is properly powered down and minimizes the risk of latch-up or damage.
  • The AD9139BCPZRL has several configuration options that affect its dynamic range and SNR. The device should be configured for the desired output frequency range, and the gain settings should be optimized for the specific application. The device's internal calibration features should also be used to optimize its performance.
  • The AD9139BCPZRL has several built-in debug features, including a serial interface for register access and a debug output pin. Engineers can use these features to monitor the device's internal state and debug issues. Additionally, Analog Devices provides a range of evaluation boards and software tools to aid in debugging and troubleshooting.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD9139BCPZRL Overview

Use the download button to access the AD9139BCPZRL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD913, or try a keyword search, such as Digital to Analog Converters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD9139BCPZRL

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑