Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADA4500-2ARMZ-R7 - Analog Devices

Description: 10 MHz, 14.5 nV/√Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier

Download ADA4500-2ARMZ-R7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADA4500-2ARMZ-R7 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
ADA4500-2ARMZ-R7 - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - (RM-8)
click to zoom
3D Models
ADA4500-2ARMZ-R7 - Analog Devices - 3D model - Small Outline Packages - (RM-8)
click to zoom

ADA4500-2ARMZ-R7 Details

  • Manufacturer Part Number:

    ADA4500-2ARMZ-R7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    MSOP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    RM-8

  • Country Of Origin:

    Mainland China

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.00019 µA

  • Bias Current-Max (IIB) @25C:

    0.000002 µA

  • Common-mode Reject Ratio-Min:

    84 dB

  • Common-mode Reject Ratio-Nom:

    115 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    700 µV

  • JESD-30 Code:

    S-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP8,.19

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Slew Rate-Nom:

    5.5 V/us

  • Supply Current-Max:

    3.6 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    DMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    10000

  • Voltage Gain-Min:

    10000

  • Wideband:

    NO

  • Width:

    3 mm

ADA4500-2ARMZ-R7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the ADA4500-2ARMZ-R7 involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure proper powering and decoupling, use a high-quality, low-ESR capacitor (e.g., 10uF ceramic) between the VDD and GND pins, and a smaller capacitor (e.g., 100nF ceramic) between the AVDD and AGND pins. Also, use a separate power plane for the analog and digital supplies.
  • The recommended clock frequency for the ADA4500-2ARMZ-R7 is between 1MHz and 40MHz. A higher clock frequency can improve the device's throughput, but it may also increase power consumption and noise sensitivity. A lower clock frequency can reduce power consumption, but it may also reduce the device's throughput.
  • To optimize the ADA4500-2ARMZ-R7's performance for low-power applications, use the device's power-down modes, reduce the clock frequency, and minimize the number of active channels. Additionally, consider using a lower supply voltage and optimizing the PCB layout to reduce power consumption.
  • To ensure EMC with the ADA4500-2ARMZ-R7, use a shielded enclosure, minimize loop areas in the PCB layout, and use a common-mode choke or ferrite bead to filter the power supply lines. Additionally, consider using a spread-spectrum clock generator to reduce electromagnetic interference (EMI).

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADA4500-2ARMZ-R7 Overview

Use the download button to access the ADA4500-2ARMZ-R7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADA45, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to ADA4500-2ARMZ-R7

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

ADA4500-2ARMZ-R7 Alternates

Showing results

Image Part Number Model
Part Image ADA4500-2ARMZ Analog Devices Inc

Operational Amplifier, 2 Func, 700uV Offset-Max, DMOS, PDSO8
Part Image ADA4500-2ARMZ-RL Analog Devices Inc

Operational Amplifier, 2 Func, 700uV Offset-Max, DMOS, PDSO8