Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADA4510-2ARMZ - Analog Devices

Description: Precision, 40 V, ±70 nV/°C, Rail-to-Rail Input and Output Op Amp with DigiTrim

Download ADA4510-2ARMZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADA4510-2ARMZ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
ADA4510-2ARMZ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - RM-8 (MSOP)
click to zoom
3D Models
ADA4510-2ARMZ - Analog Devices - 3D model - Small Outline Packages - RM-8 (MSOP)
click to zoom

ADA4510-2ARMZ Details

  • Manufacturer Part Number:

    ADA4510-2ARMZ

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    MSOP-8

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.045 µA

  • Bias Current-Max (IIB) @25C:

    0.01 µA

  • Common-mode Reject Ratio-Min:

    95 dB

  • Common-mode Reject Ratio-Nom:

    112 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    430 µV

  • JESD-30 Code:

    S-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -22.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP8,.19

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Seated Height-Max:

    1.1 mm

  • Slew Rate-Nom:

    19 V/us

  • Supply Current-Max:

    4 mA

  • Supply Voltage Limit-Max:

    22.5 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    10400

  • Voltage Gain-Min:

    1122018.4543

  • Wideband:

    NO

  • Width:

    3 mm

ADA4510-2ARMZ Frequently Asked Questions (FAQs)

  • A good PCB layout for the ADA4510-2ARMZ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the distance between the op-amp inputs and the feedback resistors. Additionally, it's recommended to use a low-ESR capacitor for the power supply decoupling.
  • To ensure stability, make sure to follow the recommended compensation capacitor values and placement, and avoid capacitive loads on the output. Also, ensure that the gain and bandwidth of the op-amp are within the recommended specifications, and that the input and output impedances are matched.
  • The maximum power dissipation of the ADA4510-2ARMZ is dependent on the ambient temperature and the package type. For the ARMZ package, the maximum power dissipation is approximately 1.3W at 25°C ambient temperature. However, it's recommended to derate the power dissipation based on the operating temperature and other environmental factors.
  • The ADA4510-2ARMZ is rated for operation up to 125°C, but the performance and reliability may degrade at higher temperatures. It's recommended to consult the datasheet and application notes for guidance on using the op-amp in high-temperature environments, and to consider using a thermally-enhanced package or a different op-amp if necessary.
  • To troubleshoot oscillations or instability issues, start by checking the PCB layout and ensuring that it follows the recommended guidelines. Next, verify that the compensation capacitor values and placement are correct, and that the input and output impedances are matched. If the issue persists, try reducing the gain or bandwidth of the op-amp, or adding a small series resistor to the output.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADA4510-2ARMZ Overview

Use the download button to access the ADA4510-2ARMZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADA45, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to ADA4510-2ARMZ

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑