Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADA4510-2ARZ - Analog Devices

Description: Precision, 40 V, ?70 nV/?C, Low Input Bias Current, Low Offset Voltage, Low Noise, Rail-to-Rail Input/Output Operational Amplifier with Digitrim™

Download ADA4510-2ARZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADA4510-2ARZ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
ADA4510-2ARZ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - SOIC 150 MIL
click to zoom
3D Models
ADA4510-2ARZ - Analog Devices - 3D model - Small Outline Packages - SOIC 150 MIL
click to zoom

ADA4510-2ARZ Details

  • Manufacturer Part Number:

    ADA4510-2ARZ

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    R-08

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.018 µA

  • Bias Current-Max (IIB) @25C:

    0.01 µA

  • Common-mode Reject Ratio-Min:

    95 dB

  • Common-mode Reject Ratio-Nom:

    112 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    380 µV

  • JESD-30 Code:

    R-PDSO-G8

  • Length:

    4.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUT LINE

  • Power:

    NO

  • Programmable Power:

    NO

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    19 V/us

  • Supply Current-Max:

    2 mA

  • Supply Voltage Limit-Max:

    45 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Voltage Gain-Min:

    1122018.454

  • Wideband:

    NO

  • Width:

    3.9 mm

ADA4510-2ARZ Frequently Asked Questions (FAQs)

  • The ADA4510-2ARZ is a high-precision amplifier, and its performance can be affected by the PCB layout and component placement. It is recommended to follow a star-grounding scheme, keep the input and output traces short and away from noise sources, and use a solid ground plane to minimize noise and electromagnetic interference (EMI). Additionally, place the amplifier close to the signal source and use a low-impedance power supply to minimize voltage drops.
  • The ADA4510-2ARZ is specified to operate from -40°C to 125°C. To ensure operation within this range, it is essential to provide adequate heat sinking, especially in high-power applications. A thermal pad on the underside of the package can be connected to a copper plane on the PCB to dissipate heat. Additionally, ensure that the ambient temperature is within the specified range, and avoid exposing the device to extreme temperatures during storage or handling.
  • The ADA4510-2ARZ has a high input impedance and a low output impedance. For optimal performance, it is recommended to use a 50Ω to 100Ω input termination resistor to match the source impedance and minimize reflections. On the output side, a 50Ω to 100Ω load resistor can be used to ensure a stable output voltage. However, the specific termination requirements may vary depending on the application and signal frequencies involved.
  • The ADA4510-2ARZ is a sensitive device and can be damaged by electrostatic discharge (ESD). To prevent ESD damage, handle the device by the body or use an ESD wrist strap or mat. Ensure that the PCB and components are properly grounded, and use ESD-protected packaging and storage materials. Additionally, consider adding ESD protection devices, such as TVS diodes or ESD protection arrays, to the input and output pins of the amplifier.
  • The ADA4510-2ARZ requires a well-regulated and noise-free power supply to ensure optimal performance. It is recommended to use a low-ESR capacitor (e.g., 10μF to 100μF) in parallel with a high-frequency capacitor (e.g., 100nF to 1μF) to decouple the power supply. Additionally, consider adding a ferrite bead or a pi-filter to the power supply lines to filter out high-frequency noise and ensure a clean power supply.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADA4510-2ARZ Overview

Use the download button to access the ADA4510-2ARZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADA45, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to ADA4510-2ARZ

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑