Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADC-H-010-10 - Adam Tech

Description: Power Barrel Connector Jack 3.00mm ID (0.118"), 5.50mm OD (0.217") Through Hole

Download ADC-H-010-10 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADC-H-010-10 - Adam Tech - PCB symbol
click to zoom
PCB Footprints
ADC-H-010-10 - Adam Tech PCB footprint - Other - Other - ADC-H-010-10-3
click to zoom
3D Models
ADC-H-010-10 - Adam Tech - 3D model - Other - ADC-H-010-10-3
click to zoom

ADC-H-010-10 Details

  • Manufacturer Part Number:

    ADC-H-010-10

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • HTS Code:

    8536.69.40.20

  • Manufacturer:

    Adam Technologies Inc

  • YTEOL:

    6.25

  • Body Breadth:

    0.354 inch

  • Body Depth:

    0.551 inch

  • Body Length:

    0.421 inch

  • Body/Shell Style:

    JACK

  • Connector Type:

    DC POWER JACK

  • Mounting Type:

    BOARD

  • Operating Temperature-Max:

    70 °C

  • Operating Temperature-Min:

    -20 °C

  • Option:

    GENERAL PURPOSE

  • Pin Diameter:

    3 mm

  • Rated Current (Power):

    5 A

  • Rated Voltage:

    12 V

  • Reference Standard:

    UL

  • Termination Type:

    SOLDER

ADC-H-010-10 Frequently Asked Questions (FAQs)

  • Adam Technologies recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital signals separate to minimize noise and interference.
  • Calibration should be performed at the recommended temperature range, and the device should be powered up for at least 30 minutes before calibration. Additionally, the calibration process should be repeated after any changes to the PCB layout or component values.
  • The maximum allowable input voltage is 10V, but it's recommended to keep the input voltage within the specified range of 0V to 5V to ensure accurate conversion and prevent damage to the device.
  • The ADC-H-010-10 is rated for operation up to 85°C, but it's recommended to derate the device for extended operation above 70°C to ensure reliability and accuracy.
  • Adam Technologies recommends using a shielded enclosure, keeping the analog and digital signals separate, and using EMI filters or shielding on the input and output lines to minimize EMI effects.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADC-H-010-10 Overview

Use the download button to access the ADC-H-010-10 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADC-H, or try a keyword search, such as DC Power Plugs or Jacks

Parts related to ADC-H-010-10

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑