A good PCB layout for the ADJ21112 should consider the following: keep the input and output traces short and separate, use a solid ground plane, and place decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure the ADJ21112 operates within the recommended temperature range, provide adequate heat dissipation through a heat sink or thermal pad, and avoid exposing the device to extreme temperatures during storage or operation.
Although the datasheet specifies a minimum input voltage of 2.7V, it's recommended to operate the device with an input voltage between 3.0V and 5.5V for optimal performance and to ensure the output voltage remains within the specified range.
During power-up, the EN pin should be pulled low until the input voltage reaches the minimum recommended value. During power-down, the EN pin should be pulled low before the input voltage drops below the minimum recommended value. This ensures proper device operation and prevents unwanted output voltage transitions.
The ADJ21112 can deliver up to 1.2A of output current, but this may vary depending on the input voltage, output voltage, and ambient temperature. It's essential to consider the device's thermal limitations and ensure adequate heat dissipation to maintain reliable operation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ADJ21112 Overview
Use the download button to access the ADJ21112 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADJ21,
or try a keyword search, such as Power/Signal Relays
