Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADM3054WBRWZ-RL7 - Analog Devices

Description: 5 kV rms Signal Isolated High Speed CAN Transceiver with Bus Protection

Download ADM3054WBRWZ-RL7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADM3054WBRWZ-RL7 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
ADM3054WBRWZ-RL7 - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 16-Lead Standard Small Outline Package [SOIC_W] Wide Body (RW-16)\
click to zoom
3D Models
ADM3054WBRWZ-RL7 - Analog Devices - 3D model - Small Outline Packages - 16-Lead Standard Small Outline Package [SOIC_W] Wide Body (RW-16)\
click to zoom

ADM3054WBRWZ-RL7 Details

  • Manufacturer Part Number:

    ADM3054WBRWZ-RL7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SOIC-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    RW-16

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Data Rate:

    1000 Mbps

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    10.3 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Number of Transceivers:

    1

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.4

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    2.65 mm

  • Supply Current-Max:

    0.075 mA

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Telecom IC Type:

    ETHERNET TRANSCEIVER

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7.5 mm

ADM3054WBRWZ-RL7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the ADM3054WBRWZ-RL7 involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces connected to the analog inputs. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure proper powering and decoupling of the ADM3054WBRWZ-RL7, use a high-quality power supply with low noise and ripple. Add decoupling capacitors (e.g., 10uF and 100nF) close to the device's power pins, and consider adding a ferrite bead or a power inductor in series with the power supply to filter out high-frequency noise.
  • The maximum cable length for the ADM3054WBRWZ-RL7's RS-485 interface depends on the baud rate and the cable characteristics. As a general rule, the maximum cable length is approximately 1200 meters at 9600 bps, 600 meters at 19200 bps, and 300 meters at 38400 bps. However, it's recommended to consult the RS-485 specification and perform signal integrity simulations to determine the maximum cable length for a specific application.
  • The ADM3054WBRWZ-RL7's baud rate and data format can be configured using the SPI interface. The device's registers can be programmed to set the baud rate, data bits, parity, and stop bits. Consult the datasheet and the device's programming guide for specific register settings and configuration examples.
  • The ADM3054WBRWZ-RL7 has built-in ESD protection on its digital and analog pins. To ensure proper ESD protection, handle the device by the body or use an anti-static wrist strap, and store the device in an anti-static bag or container. Additionally, use ESD-protected workstations and follow proper ESD handling procedures during PCB assembly and testing.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADM3054WBRWZ-RL7 Overview

Use the download button to access the ADM3054WBRWZ-RL7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADM30, or try a keyword search, such as Network Interfaces

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Suggested Parts

If you searched for ADM3054WBRWZ-RL7, you might also be interested in these parts:
Part Number
ADM1485ARZ
ADM1485ARZ-REEL
ADM1485ARZ-REEL7
ADM3052BRWZ-REEL7
ADM3053BRWZ-REEL7
ADM3054BRWZ-RL7
ATA663254-FAQW
ATA663254-GAQW
MCP2021A-500E/SN

Parts related to ADM3054WBRWZ-RL7

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑